First thing get your seats in your colour, and if poss get the panel that goes behind each seat. Take out your own panels held in by four plastic plugs, and you should see small bits of tape covering up bolt holes, two halfway up and two near the top, remove the tape. Each seat should come with four brackets, these brackets are attached to the side panel using the now exposed bolt holes. The top two brackets are also attached with four little bolts that go down through from the lip under the side window. Brackets now fitted feed the seat belts through the new side panel and attach to the two lower brackets, then fit the side panels. If you are using your origanal side panels you will have to mark up and make slots for the brackets and seat belts. Now all thats left to do is attach your new rear seats, four bolts through the lower two brackets and one bolt for each of the top brackets, tidy up job done.
The Dickie seats are really easy to fit. You firstly remove the existing wal panel where the seats go. Behind the panel you will find all the fitting brackets to screw the seat brackets to. You then either get a dickie seat wall panel with the spaces for the brackets to poke through already cut out or you can try to cut your existing panel to suit. Place the newq (or modified wall panel) back in place with the fixed brackets poking through the gaps and simply screw the dickie seat mounting brackets in place. Once this is dopne you only have to fit the seat to the brackets. A really simple job to do, only took me about 20 minutes for both seats and i had never seen it done before.
maybe!
They can be fitted with either 5 or 7 seats.
Well... It depends how many seats the manufacturer decided to install.
Seating on a Boeing 727 ranged from 131 seats for the 100-series to 145 seats (two-class configuration) or 189 seats (single class) for the 200-series.
No, toilet seats are not hard to install. There are two bolts that go through the rear of the opening on the toilet and when these bolts are secured, the seat is installed.
definitely not
The center seat in my 2010 ford expedition has been removed leaving 2 bucket seats. How can I install armrest on those seats?
Check the website Heated Seat Kits. They offer kits to install your own heated seats. They also offer tips for installing them. They are manufactured in Germany.
The 6 series, either coupe or convertible, do not have spacious back seats. The seats are for carrying small parcels or your briefcase: not people: at least not people you like.
In the hatch or behind seats
The 2012 BMW 7-Series has 14.0 cu.ft. of cargo capacity with all of its seats in place.