Call a Auto glass technician!
To remove the rear window regulator on a 1994 town car, remove the screws under the arm rest. Take off the rubber insulation and unplug the speaker wires to get it our of the way. Finally, remove the window regulator.Ê
www. motorcraft. com ( no spaces ) shows different part numbers for the 1994 and 1997 Explorer window motors
How do you install a 1994 Chevy blazer electric window? In:http://wiki.answers.com/Q/FAQ/603[Edit categories]
Look on eBay for the repair kit 3 small plastic parts that will repair the window moter for about 6.00 and if you need a regulator they are there to for 20.00 to 45.00
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
It is in the differential and secured by a 10mm bolt.
Remove the door panel. Remove the bolt that fastens the regulator to the window. Remove the 3 bolts that hold the regulator assembly to the door. Squeeze the entire assembly through the largest hole and replace with a new assembly in reverse order.
To change the driver’s side window on a 1994 Ford Tempo, first, remove the door panel by unscrewing any visible screws and gently prying it off to access the window mechanism. Disconnect the window motor or regulator if necessary, then carefully remove the old window glass. Insert the new window into the tracks, reattach the window motor or regulator, and finally, reassemble the door panel by securing it back in place. Test the window to ensure proper operation.
Here's a good link: http://www.installdr.com/
Begin by removing the 1994 Chevy passenger side door panel. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
To replace the roll-up window in a 1994 Astro Van, first, remove the interior door panel to access the window mechanism. Disconnect the window regulator and any attached components, then carefully slide the old window out of the channel. Insert the new window into the channel, reattach the window regulator, and reassemble the door panel. Finally, test the window to ensure it operates smoothly.
Remove the inside door panel of your 1994 Chevrolet Corsica. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.