how do you replace rear wiper motor on a 1997 ford explorer
fordf150.net or f150online.com/forums has helped me with most of my problems.
how do remove the tailgate's window motor on a toyota 4runner 1997 ?
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
no there different
The 1997 Ford Explorer power window fuse can be found in the fuse box. The location of the fuse will be listed on the inside cover of the fuse box.
yes, it will fit.
Replace the motor.
I'm not a mechanic / technician but I believe the answer is ( No ) From what I have read there are ( 3 ) different engine blocks for the Ford EFI , V6 engine ( which is an Over Head Valve / pushrod design ) On the Ford EXPLORER : 1991 to 1994 model years 1995 and 1996 1997 to 2000
needs a new window motor and regulator
I'm not a mechanic / technician but from what I've read there were ( 3 ) different engine blocks , 1990 to 1994 / 1995 and 1996 / 1997 to 2000 So I would say no
I'm not a mechanic / technician but I believe the answer is ( no ) From what I have read there are ( 3 ) different engine blocks for the Ford 4.0 OHV engine ( 1991 to 1994 Ford Explorer ) ( 1995 and 1996 Ford Explorer ) ( 1997 to 2000 Ford Explorer )
The pump is located either inside or on the outside of the washer reservoir.
the library should have a shop manual for this vehicle :)
The spring that assists the window to the up position is very strong and do not attempt to remove the old motor with the window in the down position. Your fingers wil thank you. -Inspect the power window switches for broken or loose wires. -Check the power window fuse or circuit breaker. -Remove door panels and check power window motor wires to see if they are loose or damaged. Inspect the glass mechanism for damage which can cause binding. -If it's only one window not working and all the above checks out ok then you may have to replace the window motor.
Yes it will fit.
possible motor issues if you hit the button and you hear NO sound then start with the motor. if there is a click or grinding the window fell off the track have to reset it.
you need to check the switches first. if not that, it is the power window motor .
there are two fuse panels one inside and one outside under the hood. you can check them and look to see if they are blown. I think your problem might be a power window motor. Usually the window motor goes bad and the window quits working.
no after 1998 they are but the 1993-1997 Chrysler 3.5l engines are not
You would need to remove the window regulator, and the motor. Replace them both and drill a hold through your door panel where the crank will come out.
Yes, you will need to install the 1997 oil pan and intake manifold.
you have to replace the whole motor assy. you can buy after market from places like napa.