That depends on if you are installing in an existing location or if you are installing on the passenger side. If on the driver side then there should be screw holes in the door to mount the mirror, you may have to remove the door panel to feed the remote control through if it is a remote style mirror. If you do not have any existing srew holes or the ones that you do have are damaged then you may need a mirror mount kit from AAPD.NET. ::AverageJoeResto.com::
Passenger side mirrors were optional. Some were mechanically (not powered) remote controlled.
AverageJoeResto.com has a guide to selecting and purchasing a classic Mustang that explains where the VIN is located.. My 1967 Mustang has the VIN on the Driver side and also under the fender on the passenger side. Selecting and Purchasing a Classic Mustang
can a 1971 ford mustang rear differential interchange with a 1967 ford mustang? The only way that a differential from a 1971-73 mustang whether the 8.8 or 9 inch to fit a 1967 ford mustang, is to have it cut shorter a few inches each side and will need the shock supports repostioned on the axle to match the supports on the frame of the car
you have to take out the door panel, then remove three nuts it has from inside out and the electrical plug
double sided tape
The spring side goes INTO the intake manifold.
The proper side view mirrors for your 71 are 71-73 same model and were remote control. 74-78 used a different mirror.
Side view mirrors.
Magnifying mirrors, side mirrors on cars and trucks, certain securuty mirrors.
It is important to have a diagram when making changes to a car. A diagram of this sort for a 1967 Mustang can be found in the cars maintenance manual.
adjusting your rear view and side mirrors properly Edit: Or Installing large side mirrors
Curved mirrors are mirrors that have a spherical side. example - concave and convex.