depending on it aftermarket intake or factory but both use same piece.
If factory you will need screw drivers,pair pliers EASY.
You look under hood connected to your air box you will see a (most time)black colored tube with a small black box ontop with a small VIN # on it. That is your MAF. You just unsecure the 2/3 clamps by pressing them together with pliers,unscrew the lock clamps intil you can move that section of tube out the way.
If an all factory intake it will be beside another odd looking taller piece plastic box slim. directly between that and the air box.
Few bolts twisted and a clamp or 2 loosened wal-lah your done removing the old one and reverse to put new one on. I just did this today. Good Luck
in the air filter cover
mass air flow sensor
it could be your mass air flow sensor
The mass air flow sensor is installed between the intake of the engine and the air filter
The mass air flow sensor is installed between the intake of the engine and the air filter
The mass airflow sensor is installed in the air intake duct If you look at the air filter box it is just to the left on the arm of the box
yes, but in certain ways like positioning..
It does not have a mass air flow sensor.It does not have a mass air flow sensor.
It doesn't have a mass air flow sensor.It doesn't have a mass air flow sensor.
It does not use a mass air flow sensor.It does not use a mass air flow sensor.
It doesn't use a mass air flow sensor.It doesn't use a mass air flow sensor.
It does not have a mass air flow sensor.