You won't. Once they twist once, it keeps happening. You'll need a new belt
The 3000 Series Cub Cadet supposedly have no belts, not transmission belt nor deck belts.
you have to take it to a shop or get under it and put it on pully by pully!
partstree.com they have every diagram for cub cudet 1440 riding mower
You will need to order a manual on the mower from the manufacturer (I assume Simplicity).
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
The belt from the mower engine to the transmission would be called a drive belt.
how do you change drive belt on a ltx 1040 cub cadet
Where can we find a simplicity riding mower model 284707 belt diagram
How do you replace a mower deck belt on a stx38 hydro
We will need some more details... Is it the drive belt or the belt for the blades?it is the drive belt for Murray lawn mower model 38618x92a
I just changed my drive belt on my Cub SLT 1550...first, you must remove mower deck, then crawl under tractor and remove bolt that holds the mower belt pulley and the centrifugal clutch (you will need to use something to hold the shaft so it doesn't spin when you try to loosen the bolt from the shaft). Once you get this far, you can lower the mower belt pulley & the cetrifugal clutch & finally the drive belt pulley. Now you can remove the drive belt. Install new drive belt & make sure you put all parts back the way they were removed...it does take some work, but you can save about $200 doing it yourself VS dealer.
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.