you have to listen to see if your fuel pump is operating when you turn your car on (do not start it) you should hear a humming sound if you dont you can tap your gas tank if you hear the sound after tapping the gas tank now try to start it if it doesnt start it the fuel pump.
The fuel pump pressure sensor monitors the fuel pressure of the vehicle.
The fuel pump pressure sensor monitors the fuel pressure of the vehicle.
Yes it does have a sensor, which is located with the fuel pump in the tank. Additional Info: It will cost you about 900$ Canadian to replace the entire fuel pump (the sensor is with the fuel pump).
The fuel level sensor is inside the tank, attached to the pump module.The fuel level sensor is inside the tank, attached to the pump module.
I don't know about the Jimmy, specifically, but the fuel sensor on most fuel injected cars are located inside the gas tank, as part of the fuel sender (pump).
The crankshaft position sensor has nothing to do with the fuel pump but a defective fuel pump relay and fuel pump fuse will and also a missing ground circuit will cause it not to run
The fuel level sensor is in the tank, on the fuel pump module.
Check the fuel pump fuse & relay.
The fuel level sensor is on the fuel pump module in the tank.
how do you know if the fuel pump is not working what are some signs. my care just won't kick over i have a new battery was working then just stopped
if you are refering to the sensor for the fuel gauge, it is in the fuel tank with the fuel pump.
The fuel level sensor is located in the fuel tank and is mounted on the fuel "sender" assembly. This is the assembly that contains the fuel pump. The sensor comes as a unit with the attached float. The sensor can be changed, separate from the fuel pump, but it may be a good idea to change the whole assembly while you are there IF you have had any problems with it. But you can save a little money by just changing the sensor. You will have to drain and remove the fuel tank to get to the assembly.