Want this question answered?
Yes, but the dust and sand particles in the air will damage the engine.
The first question to ask is are you getting suction from the pool, When the sand filter is cleaned the pressure goes down. So the only thing you should worry about is. 1 The filter should be set on filter. you should be getting strong suction from the suction side outlet of the pool. and you should make sure you are not sucking air into the skimmer.
If you have a cabin air filter, it will be located behind the glove compartment. Empty the glove compartment, push in the plastic tabs on each side and lower the glove compartment door. You will see an rectangular access door with a sliding lock if you have a cabin air filter. Slide the lock to one side, remove the filter and replace it with a new filter. Be sure to note the air flow arrow on the old filter. If you see a plastic cover with many holes in it but no access door, you do not have a filter. If you have a tri-zone air conditioning system, you have an air filter. If you have a single zone system, you don't.
Look under the hood behind the air filter.
You have one or more bad filter elements inside the filter. The filter needs to be serviced .
I usually change my air filter once a year, that is a good rule of thumb. If you dont change your air filter it can hurt your gas mileage. Its cheap to.
Im not an expert by any means but what I know is that with a sand filter system if your pump is not the corect HP for the filter it will push dibris and sand right back into the pool answer:: That may be true in remote cases where the system was not installed correctly or had well balanced/matched equipment. The correct answer would most likely be that you have a broken lateral(s) which allow sand to pass back to the pool. It is best to find the correct type lateral for your specific filter. Some manufacturers have made modifications to same model filters as production and technology progresses. Replacing the lateral required turning the equipment off and making sure it will not come back on while it is being worked on. Removing the filter top or valve assy. Removing all sand, finding the damaged lateral(s), replacing lateral, replacing the sand with new sand in the correct manner, replacing the valve or filter top and starting the equipment and backwashing the filter to reduce the dust blow back K
where is the cabinet air filter for 2001 ford ranger located
3 , air filter ,fuel filter, oil filter that i know of, and don't forget the cabin filter.
As far as I know, there is no such thing as an airconditioner filter.
On my 2003 4Runner and my 2008 Tundra the cabin air filter is located right behind the glove box. I don't know where yours is located but I'll bet it's in the same place (inside the dash). Instructions usually come with a new cabin filter so check the box. Believe me it's easy to change. The only air filter under the hood is the engine air filter.
don't know