The normal test is to 'beep' it with a thermal diamond tester. This device measures how fast the material conducts heat and can thus tell if it is real diamond or not (diamond is the best heat conducting material at room temperature).
Basically every jewelry store has one of these, so you can ask them to test it for you.
Physically, if the stone appears to be clear, even though it's coloured -- and it is extremely hard, it's worth taking it in for testing. See below for photos of raw diamonds.
The field test for raw diamond is 'extreme hardness'.
The field test for raw diamonds is 'extreme hardness'. Otherwise, when you take it to your local jeweler, a probe will prove whether or not you've picked up a raw diamond.
This depends entirely on the diamond in question.
The field test for diamond is hardness. Try marking other rocks. Otherwise, carry the rock into a jeweler who can use a probe and tell you whether or not your rock is a raw diamond.
The field test for a raw diamond is 'extreme hardness'. Otherwise, pick up the stone and take it to a jeweler, who may be able to confirm that you have picked up a diamond and not another clear mineral.
The proper words are raw diamond, raw stone, rough diamond, uncut diamond -- all are appropriate.
The field test for raw diamond is 'extreme hardness'.
Your question is about a raw diamond. A raw diamond must be evaluated for its natural colour and clarity. Then you can work with a diamond cutter to estimate the value of a cut diamond that can be 'rescued' from the raw diamond. The diamond cutter may offer to purchase the raw stone, or work out another arrangement with you for its ultimate value. Typically more than 50% of the carat weight of a raw diamond is lost during the cutting process.
Take the raw stone to a jeweler who can apply a probe to the stone to determine whether or not it could be an uncut diamond.
You're asking about a raw diamond, one that has not been cut or polished. In context, sometimes a raw diamond's "... eight corners are truncated by the eight faces of the octahedron." This is one description of a diamond's raw, crystalline form. You can read more about the geometric descriptions of raw diamonds, below.
The raw diamond of 19.5 carats weighs about 3900 milligrams. Remember, though that raw, gem-quality diamonds can lose about 60% of their weight when cut and polished.
A raw diamond looks like two square pyramids attached at the base.
Yes, if it is hit by another raw diamond or struck with an incredibly powerful industrial laser.
The largest raw diamond found to date is the Cullinan Diamond, found in South Africa in 1905. It weighed over 3,000 carats.
Yes, diamond is a raw material and is located deep within the earth's mantel.
The field test for raw diamonds is 'extreme hardness'. Otherwise, when you take it to your local jeweler, a probe will prove whether or not you've picked up a raw diamond.
A raw diamond is a mineral -- a stone -- mined from the earth from which cut and faceted gemstones (25%) and industrial diamonds (75%) are sourced.