Want this question answered?
Eight on a 15 amp circuit, tweleve on a 20 amp circuit, including the gfci receptacle itself.
If you're using a GFCI breaker then the entire circuit will be protected by just the breaker alone. Every receptacle, switch, etc on that breaker will utilise the GFCI protection. You may have problems with it tripping if you plug in a motor (vacuum, etc) on the circuit.
If the wire to the switch is AWG #12 you need a 20 amp switch because it is a 20 amp circuit.
A 15 amp circuit breaker is used to protect a # 14 copper wire which is the minimum size wire that can be connected to a 15 amp receptacle.
You would need a 20 amp switch when the load controlled by the switch can draw as much as 20 amps. If you have a 20 Amp breaker supplying the circuit then you need to size all switches and outlets on that circuit to 20 amps.
Eight on a 15 amp circuit, tweleve on a 20 amp circuit, including the gfci receptacle itself.
If you're using a GFCI breaker then the entire circuit will be protected by just the breaker alone. Every receptacle, switch, etc on that breaker will utilise the GFCI protection. You may have problems with it tripping if you plug in a motor (vacuum, etc) on the circuit.
Any amp will power a 15" sub. What you need to know is what is the RMS of the 15" sub. Lets say its 200 watts RMS than you will want a max of 200 watts for your amp.
If the wire to the switch is AWG #12 you need a 20 amp switch because it is a 20 amp circuit.
Yes, provided that you don't really need 20 A on the circuit.
In North America you would need two 15 amp breakers to obtain 240 volts. The wire for a 15 amp circuit would be #14 AWG. So to answer the question, yes a 240 volt receptacle can go on a 15 amp circuit.
Probably - replace it and see
no you cannot, it is dangerous, you need to have a 20 amp service installed in order to do that. hope i helped
you only need an amp to boost the bass in your stereo system with a sub woofer (10'', 12'',15'') so No you don't necessarily need an amp!!
Replace the 30 Amp Breaker with a 15 Amp breaker.
Yes, but don't try to put 15 amps through it! You might need to change your plug too!
Yes as long as you change the 50 amp breaker to a 15 amp breaker. You will be hard pressed to get the 50 amp #6 wire under the terminals of the 15 amp receptacle.