If you hear grinding with brakes engaged and without... Also you can put the side with problem on jack stand and try to move the wheel by applying pressure and the top of tire and bottom. If it is rocking it means the bearing is bad.
The hub bearing can go bad and create noise.
driving straight down the road about 35 mph and gentlly swing the steering wheel to the left and then to the right . The noise should come and go if its a front hub bearing.
Not knowing the extent of wear I can't answer that question with any degree of accuracy. I suggest replacing the bad hub/bearing assembly if you can hear the bearing rumble.
I have a 2003 that sounds like it has a bad rear hub bearing. I plan to change it this week. I'll let you know when I'm done.
The hub bearing can go bad and create noise. It depends on how hard to drive or work your truck.
If your wheel bearings have gone bad then you will have to replace the bearing ( cone ), the race ( or cup ), and the grease seal. The hub should not have to be replaced unless it was damaged as well as the spindle.
They're the same thing. What I mean is that the bearing lies between the axle and the hub, and the wheel is bolted to the hub.
It has 1 big hub bearing per side and you can not service them. It has factory sealed bearings. If there bad then you must replace the bearing.
Bad wheel hub bearing? If you are referring to the slip-on type of rotor, then yes, some of them feel loose on the hub and this is normal.
a hub is what the wheel bolts to on the car.the hub bearings are the bearings that allow the hub to turn on the axle. most times they are called axle bearings,
It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple! It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple!
Your front wheel hub bearings may be bad. Not too much work, if you have a bearing press, if not, about $500 per wheel hub bearing at the dealer.