Want this question answered?
When a tuning fork vibrates over an open pipe and the air in the pipe starts to vibrate, the vibrations in the tube are caused by resonance.
One is from Neptune
Replace the nitrogen & oxygen air with helium and oxygen. tighten the tension on the vibrating thing (e.g., string) make the vibrating thing smaller, thinner. (e.g., tuning fork)
No. A fork would most likely be used to make a lever.
-- A strobe light can display the mechanical vibrations in a material that generates or responds to sound, such as a loudspeaker cone, a tuning fork, or a guitar string.-- An oscilloscope can display a graph of sound vibrations, if they're first intercepted and converted to an electrical signal by means of an appropriate transducer, such as a microphone.
If there is resonance, then making one vibrate will also make the other one vibrate in a noticeable way, since:* The vibrations are transmitted through the air, and * Any such small effect is reinforced, over time, due to resonance.
If there is resonance, then making one vibrate will also make the other one vibrate in a noticeable way, since:* The vibrations are transmitted through the air, and * Any such small effect is reinforced, over time, due to resonance.
Resonance
guitars?
Guitars?
Guitars?
When a tuning fork vibrates over an open pipe and the air in the pipe starts to vibrate, the vibrations in the tube are caused by resonance.
harmonic resonance
The purpose of a tuning fork is to know the exact pitch of a certain note, and then tune to that note. The string is probably loosened to match the pitch of the tuning fork.
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs
Yes. It's an effect called 'resonance' - two identical things can vibrate in synch if the vibrations of one can someone pass to the other. The usually way of doing this is to stand them both on the same surface, so that the vibration can pass through that object.
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.