0
How do you know where on a the gear to install a new motor for the drivers side window of a 1999 acura integra?
Wiki User
∙ 15y ago
It does not matter, the motor will continue to turn either way until stopped by the window regulator.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How to install a boost gauge in a Acura Integra?
How to install a boost gauge in a acura integra?"
Where can i get an alternator installation diagram for a 1991 Acura Integra?
how to install a altinator on a 1991 acura integra
How do you install the halo headlights in an Acura Integra?
hump it
Is your 92 Acura Integra master window switch interchangable?
The 1992 Acura Integra master window switch is interchangeable with other 1992 models. The master window switch was used in all 1991 through 1994 models.
How do you change bearings on a Acura Integra?
Bearings require a mechanical press to be properly changed in an Acura Integra. Remove the hub from the vehicle and take it to a press. The machine will properly install a new bearing and ensure a safe install.
On 1991 acura integra were is idle air control valve located?
The 1991 Acura Integra idle air control valve can be found on the firewall. The valve will be on the drivers side of the firewall.
What kind off transmissions can you install on a 94 Acura Integra LS?
You can install any Honda b series hydraulic transmission to your car, like the integra gsr transmission, or the integra type r transmission
Does a 91 Acura Integra have a b16 engine?
91 acura integra has a b18 91 acura integra has a b18
How do you change a starter on a 1993 Acura Integra?
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.
Does the windshield from an Acura Integra'96 fit an Acura Integra 1992?
no
How do you replace the driver's side electric window switch on a 1992 Acura Integra?
The driver side electric window switch on a 1992 Acura Integra is reached by removing the door panel. Unbolt the switch from the mounting bracket and disconnect the wiring from the harness. Replace the unit.
How do you install a front bumper on a Acura Integra?
On my 1990 integra, there are like 5-8 bolts underneath and 1 or 2 on the inside of each wheelwell
