You pull the hood trigger located on the driver's side below the dash. My hood sticks a little so I have to hit the top but it should pop up and there is a black plate about 4 inches to your right that you push up and the hood should spring open.
i got 22 on my 88 caprice i put 4 inch lift springs front and rear. tires are 265/35r/22
you can buy spacers for the sprimngs that mount uder your stock springs you can just search for caprice classic lift kit
No u do not need a lift for 22 only for 24 and up and with a low profile tire with 24 Im pretty sure u won't need a lift on that either
It is in front of the passenger side rear wheel, tucked up against the frame. This is the main filter. Al
Chevy Caprice had the digital dash installed from 1994 and up, but if you have an older model you can still get the digital dash.
Is it a V8 or V6? Either way the firing order should be located on top of the intake manifold, up front behind the thermostat
The compressor is probably froze up.
Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted. Push seat bottom towards rear of car, at the same time, lift up on front of seat. Seat back can then be unbolted.
The best way to fix an exhaust leak on a 1994 Caprice is to install new exhaust pipes where the leak is located. Exhaust leaks are dangerous and can cause carbon monoxide to build up in the passenger area of the vehicle.
grab the front of one side LIFT!.....grab the front of the other side..LIFT! that should do it...then line up then push down for installation
call your Chevy parts man at the dealer and he will be able to look it up for you.
Front 4 bolts one in each corner Rear force lower end of benck back to unclip-then lift out bench back will have either clips or bolts at lower end - release these and slide back up to release upper clips