answersLogoWhite

0


Best Answer

To be blunt, you cannot. However, a trained pistolsmith may polish parts and change springs. An attempt to do it yourself is likely to with either an unsafe or non-working gun.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you lighten the trigger pull on a s and w bodygaurd 380?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you break down a lorcin 380 hand gun?

clear gun , pull slide back and push in takedown trigger wich is located around firing pin and pull slide up crarfull things tend to jump out


Does a colt series 90-380 pony have a safety?

The Colt Pony Series 90 has no safety because it is not deemed necessary. The .380 caliber pistol is what is called a double action auto. That is to say the first squeeze of the trigger both cocks and drops the hammer in the same manner as a revolver. Because the first squeeze also cocks the hammer, it has a long pull (the distance the trigger travels backwards), and it is highly unlikely that such a long pull could be made accidentally.


What is a rm 380 calibur pistol with folding trigger?

15-60- USD or so


What is the value of a 380 colt lightning?

In poor storage with minor rust expect a $300.00 tag with the new demand on these. If in excellent condition expect a $500.00 tag. Lightning is a run of 500 made, although the demand is far greater for the Mustang at an average of $700.00 and up, and an even bigger demand for the Pony which is a DAO and has a very long trigger pull. The Pony .380 can easily pull $700.00 to $1200.00 probably because it was only made for about 2 years, 1997 & 1998 from what I have been told.


When you pull back slide on 380 auto the bullet enters chamber but will not fire?

Have a gunsmtih examine it.


Need trigger and plastic piece for amt 380 backup?

Try e-gunparts.com, gun shows, gun shop, want ads.


Can you find parts for an AMT 380 9mm Back Up pistol?

I need a trigger spring for an AMT 380 backup single action. It is a coil type spring. Part # 123780. If you know where please email me at msulli5429@aol.com Thanks


What to do if you cant pull your lorcin 380 back?

make sure empty and safety is off. then disassemble to see what is causing the jam.........


How do you take apart your lorcin 380 auto?

insert a erasered pencil into the back and push in the spring, slightly pull the slide back and pull up at the same time. Be careful watch for flying parts.


What is 376 rounded to the nearest ten?

380


How to Grendel p-12?

The Grendel P-12 is a semi-automatic pistol chambered in .380 ACP. To operate it, load the magazine with ammunition, insert it into the grip, pull back the slide to chamber a round, aim at your target, and squeeze the trigger to fire. Make sure to follow all safety guidelines and familiarize yourself with the firearm's manual before use.


What is 84 percent of 380?

84% of 380 = 84% * 380 = 0.84 * 380 = 319.2