Setting the timing on Chrysler's Eagle Vision 3.5L engine is a real dream. The engine has two camshaft sprockets (the 3.5 is an SOHC engine) total, one each on the left and right side. There is a white dimpled timing mark on each sprocket.
Now, on the rear timing belt cover you'll find two white dimpled marks. Simply align the camshaft sprockets with the marks on the covers, i.e. align the camshaft dot somewhere in between the two white dots on the cover. Your camshaft gears are now set.
The next step is to set the front crankshaft sprocket correctly for top dead center (TDC). This couldn't be easier. There is a TDC indicator stamped into the rear timing belt cover, right above the crankshaft sprocket. It's easily seen. The crankshaft sprocket itself has a little pointed nub on it that you align with the TDC indicator. Simply turn the crankshaft sprocket until the nub lines up under the TDC indicator and you're set.
When replacing the timing belt (3.5's have belts and 3.3's have chains), remember to install it counterclockwise starting at the crankshft pulley. Also, as a matter of practicality, whenever you replace the timing belt you should replace the water pump too.
3.0 liter timing chains marks
The 1988 Mitsubishi 2.0 liter engine timing marks can be found on the front main pulley. The timing marks will be scattered around the outside of the pulley.
Your 1998 Mazda 3.1 liter engine does not have timing marks on the crankshaft. The timing marks are on the engine flywheel.
Where are the timing marks on a 1992 Toyota Paseo 16 efi 1.5 liter engine?
The Chevy Cavalier 2.2 liter engine timing marks can be found on the main pulley. The timing marks will be scattered around the outside of the pulley.
location timing marks 1993 dodge datona
timing marks dodge 2.2 engine how to set them
The timing marks for your 3.0 liter V-6 Ford Taurus can be found on the main pulley. The timing marks can also be found on the flywheel.
The Mitsubishi 2.4 liter engine timing marks can be found on the front of the main pulley. The timing marks will be scattered around the outside of the main pulley.
The timing marks on a 93 Dodge Colt with a 1.5 liter engine are located on the timing chain and the cam sprocket. They must line up with each other to ensure proper initial timing.
What exactly are you trying to do? Timing is controlled by the computer. Timing marks are on the timing chain gears. I own a 1998 Malibu JJ
iknow were the crank marks are but not the cams