Anything that draws energy from a supply is a load. So you 'load' a transformer by attaching a lamp, a motor, etc., to the transformer's secondary windings.
A transformer is fundamentally a set of coils; therefore, a transformer is an inductive load. However, by "transformer load", you seem to mean "the load that is connected to a transformer". Whether that load is inductive or capacitive depends mostly on what is hooked up to the transformer.
Hope this helpsAn "OFF-Load tap transformer" can only have it's tap adjusted when it is De-energized,while the "On-Load tap transformer" can adjust its tap under load conditions.Kind RegardsHammad KhanUniversity of Western AustraliaAnswerAn 'off load' transformer is one whose secondary is open circuited, and not supplying a load. An 'on load' (not 'load') transformer is one that is connected to a load.
Any transformer can be overloaded by applying a load above the capacity rating of the transformer.
A: a transformer will follow the rule of input output ratio with no load. As soon as a load is applied there will be changes in the ratio
No
the efficiency is maximum in a transformer when no load loss is equal to load loss.
It is a transformer with No load attach to it.
load
To calculate the no load current from transformer & core loss is also calculated.
A transformer requires a 75-kVA minimum load in order to be set.
The change in output voltage from no load to full load defines the voltage regulation of that transformer.
The load side of a transformer feeds the device, such as a light or motor. It is the output of the transformer. The input, or line side, provides the voltage that is to be transformed, either up or down, to supply the load side.AnswerA transformer's primary winding is connected to the supply voltage, and the secondary winding is connected to the load.