Looking at the front of the engine driver's side front to rear 1-3-5. Passenger side front to rear 2-4-6. Firing order 1-6-5-4-3-2 Rotor turns Clockwise. Remove all spark plugs and remove the distributor cap. Turn the engine over until you feel compression on the #1 spark plug hole. You can place your thumb over the hole or a compression gage. When you start to feel compression, stop and place a long screwdriver in the hole and touch the top of cylinder 1. Now slowly turn the engine over by hand until the cylinder reaches TDC. The rotor will now be pointing at the #1 point on the distributor cap.
trying to locate crank shaft sencor for 1993 Chevy lumna trying to locate crank shaft sencor for 1993 Chevy lumna
You can replace them in any order. Just do not forget which plug wire goes to which cylinder.. The engine is a 4.3
Were do I locate the fuel filter on a 1993 Ford probe 4 cylinder
Godspeed the Vortex was created in 1993.
2000 pounds max.
the fireing order is on the intake
in the fuel tank
65 FT. LBS.
1-3-4-2
It is the part that the fan bolts to, on the front of the engine GOOD LUCK
the OE gap is 0.60 of a inch
A Stratus is a Dodge not a Chevy. Neither Dodge or Chevy use inertia/safety switches.