answersLogoWhite

0


Best Answer

You will need to call Ground Penetrating Radar Systems Inc. they have a technician provided in every state. this number can be found at the Related Link. The GPRS company will come out and locate the various underground utilities on the property in question even if it is private property. It will be marked with water based paint and flags of different colors to distinguish the different ones apart. Yellow for natural gas, red for power, blue for water, green for sewer, orange for communications o include telephone and cable T.V. The tolerance levels are within a few inches on each side of their mark and on depth.

Ground Penetrating Radar Systems Inc. uses Ground Penetrating Radar AND Radio Detection to locate the underground utilities. GPRS's use of both technologies allows for an extremely thorough investigation. The Radio Detection can only detect metal utilities or plastic with a tracer wire, and GPR can detect anything in the soil within the electromagnetic frequency parameters which are for every foot of soil penetration the target must be an inch in diameter. Therefore both technologies used together provide the most thorough investigation available.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

17y ago

Its called line location you clip a transmitted signal to the lines inside and trace them with a hand unit following that signal.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you locate underground utilities?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Just been told that before you even start digging in your garden you need to get utility plans to check if any cable or pipes etc are under it is this true?

There is a free service out there, you can call, they will locate any underground utilities for you. Around here it is called Digger's Hotline. Most underground utilities are at least two feet down, most gardens do not get any where that deep.


What are the mushrooms where pigs are used to locate?

Pigs locate an underground mushroom known as a truffle.


How to locate PVC pipe underground?

With a PVC locator


Why is it important to make accurate surveys of underground utilities?

Accurate surveys of underground utilities help prevent accidental damage during construction projects, reduce the risk of injury to workers and the public, and minimize costly delays and disruptions. It also ensures that infrastructure is maintained and operated safely and effectively.


The process of digging into the earth to locate artifacts which have been underground for centuries?

Excavation.


Is there a underground?

Yes, there are underground locations such as subway systems, basements, and tunnels that exist beneath the surface. These spaces serve various purposes including transportation, storage, and utilities.


How do you locate underground cable fault?

Time Domain Reflectometers can be used to locate where an underground cable fault lies. Time Domain Reflectometry (See wikipedia) is a measurement technique to identify the location using reflected signals sent down the cable line.


What is the meaning of a pink surveyor flag?

A pink surveyor flag typically indicates underground utilities, such as gas, water, or communication lines, present in the area. It serves as a warning to those performing excavation work to avoid damaging these utilities.


Does blue utility flag mean excavation?

Yes, a blue utility flag typically indicates the presence of underground utilities like water lines. It is used by utility companies to mark the location of buried utilities before excavation work to prevent damage or accidents.


How much clearance is required between plumbing and electrical underground services?

I do not think there is an actual code but general rule of thumb is 1 foot between all utilities.


How do you find and remove files in Linux?

From the command line: To find the files there are a variety of utilities that you can use including: find, locate, and slocate. To remove the files use the command: rm filename.ext


What are calibration gases used for?

Calibration gases are used to ensure that gas detectors are operating properly when working in confined spaces. They are commonly used in underground utilities or natural gas refineries.