Crawl under the vehicle and look up. You will see the converter connected to the exhaust pipe coming from the engine.
catalytic converters are located near the muffler.very difficult to replace
Crawl under the vehicle and follow the exhaust pipe from the engine rearward. You will run into the catalytic converter.
Between the exhaust header and the catalytic converter.
To locate the catalytic converter on a 2000 Ford Explorer, first, lift the vehicle using jack stands for safety. The catalytic converter is typically found underneath the vehicle, between the exhaust manifold and the muffler. It is a cylindrical component, usually metal, and has a heat shield surrounding it. You can follow the exhaust pipes from the engine to find it more easily.
look under you Chevy and locate the catalytic converter. Your 02 sensors are located before and after the catalytic converter on your muffler. See 1 or 2?
The oxygen sensor is located just upstream from the catalytic converter. Crawl under the vehicle, and locate the catalytic converter, after the exhaust manifold and before the muffler. There should be a four wire sensor there.
Crawl under the vehicle and look up at the exhaust system. The catalytic converter is the first part that looks like a muffler mounted in the exhaust system coming rearward from the engine.
Sensor 2 is the one after the catalytic converter. Located strait down under intake.
They are all threaded into the exhaust system at various points starting with one directly behind each exhaust manifold then one just before the catalytic converter then one just after the catalytic converter.
To locate the oxygen sensor on a Suzuki Swift, first, identify whether you are looking for the upstream (pre-catalytic converter) or downstream (post-catalytic converter) sensor. The upstream sensor is typically found on the exhaust manifold or just before the catalytic converter, while the downstream sensor is located after the catalytic converter. You can trace the exhaust pipe from the engine to find these sensors, which usually have a wiring harness connected to them. If you're unsure, consulting the vehicle's service manual can provide specific diagrams and locations.
On a Ford Expedition ( 4.6 and 5.4 ) Bank 1 is the passenger side of the engine Sensor 1 would be close to the engine BEFORE the exhaust enters the catalytic converter Sensor 2 would be AFTER the exhaust has passed through the catalytic converter
Toyota V6 1989 Oxygen senson is located on the driver side in front of the catalytic convertor. It has four wires and held on by 2 bolts.