There should be a square hole on the belt tensioner arm that a 3/8's drive ratchet will fit in, just put a pipe over the ratchet for extra leverage and turn the tensioner in the direction that will release the belt.
Loosen the tensioner pulley on your Monte Carlo 3.1 liter engine. Slide the tensioner pulley to the right. The serpentine belt can be removed. Put the new serpentine belt on and slide the tensioner pulley to the left.
You can change an idler pulley on a 2001 Monte Carlo by first, removing the negative cable from the battery. Using a socket wrench, loosen the tension adjustment bolt. Slide the serpentine belt away from the pulley. Remove?æthe center bolt, and remove the pulley from the engine. Replace the pulley,?æreturn and tighten the bolts, and replace the serpentine belt.
Bolts on the caliper of a 1999 Monte Carlo will loosen to the left and tighten to the right.
serpentine belt.
Near the top of the serpentine belt path is a belt tensioner; it is spring loaded and has a shinney pulley on it. Insert a wrench into this tensioner and pull against it and the tension will be released so you can replace your belt. I am assuming your question is about the serpentine belt.
on the front of the engine and it is run by the serpentine belt.
on the passenger side of the car and it's driven by the serpentine belt.
Look under the hood of the car for the diagram or in your owners manual if you have it.
Look on your timing chain cover there should be a diagram attached.
Yes, Monte Carlo is in Monaco.
Monte Carlo is in Monaco ! There are 350 kms from Montpellier to Monte Carlo
There is no such thing as a 2010 Monte Carlo, so the answer would be no