0
Cyanuric Acid levels can be maintained in a few different ways. When you first open your pool if you balance the water correctly you will usually add Stabilizer to your pool which will raise your levels. The ideal levels are between 30-50 with the minimum 10 and max level at 100. Depending what you use for sanitation for example some TriChlor or slo tabs usually have a % of stabilizer built into the chlorine tab but will not usually be enough to bring you to the correct levels but will help whereas liquid chlorine and DiChlor Granulars will not have any stabilizer in them. The purpose of keeping these levels up will save you money as Stabilizer will help keep the chlorine in your pool. If you add it in the initial balancing of your pool you may need to add some in the later part of summer as well. For more pool help visit www.prospectpoolsllc.com/blog
Wiki User
∙ 14y ago
Wiki User
∙ 11y agoYou purchase a chemical known as Stabilizer. This is Cyanuric acid. Follow the label instructions. This is a chemical that more is not better. If the CA level gets to high the only way to remove it is to exchange the water. So it is better to error on the low side. Also, 3" chlorine puck also already contain cyanuric acid, (known as stabilized chlorine) this will contribute to the level of CA going up over time. Cyanuric acid protects the chlorine for the UV of the sun and helps keep the chlorine in the pool longer. Again Too much is not a good thing though, it will lock up the water.
Wiki User
∙ 14y agoBy replacing a volume of water. depending on where you live water is cheaper than chemicals
Wiki User
∙ 14y agoYou cant without draining the pool, For more info on this subject go too the related link below (CYANURIC ACID)
Add your answer:
Earn +20 pts
Can baking soda raise the cyanuric acid level in a pool?
No, sodium bicarb is used to increase alkalinity. Cyanuric acid is used as a stabalizer. One is base the other acidic.
How do you raise the cyanuric acid level in pool water?
Remove some water in container (10-20%) and add new water. example: pump water high in cyanuric acid out of a swimming pool and the add fresh water to the pool.
How can a high cyanuric acid level in the pool affect your health?
cyanuric acid can react with melamine to create toxins in the body, melamine may be found in dairy products from time to time.
How do you measure the level of cyanuric acid from stabilized pucks in a pool?
Pool supply stores carry testing kits, from the simple to complex; many of these include tests for cyanuric acid. If you don't want to buy a kit for such purpose, many pool supply stores will test water samples for free.
After shocking the pool four times this week your chlorine level still registers zero My Cyanuric Acid levels are 150 ppm How can you bring the chlorine level up?
we used liquid chlorine to raise ours so far it has worked
What to do when your pool does not retain chlorine?
Ad cyanuric acid/stabilizer, this is available from your pool shop
How do you raise cyanuric acid levels in a spa?
Cyanuric acid is generally called chlorine stabilizer and it is used to prevent the suns UV rays from eating up the chlorine in outdoor pools. Because most spa's are covered when not in use this is generally not a concern for spa or hot tub owners. If you do however have an outdoor uncovered spa and you wish to raise the CYA level you would simply visit your local pool supply store and purchase some chlorine stabilizer, just ask for cyanuric acid and they will know what to get you.
You continually add chlorine tablets to your pool and still the chlorine is way to low How do you raise it up?
Check if you have any stabilizer in your pool without stabilizes (cyanuric acid) the chlorine use is greatly increased.
How often should the water be changed in 3700-gallon above-ground pool?
Assuming no other complaints you would only need to change water to lower the total dissolved solids level or cyanuric acid level. TDS should be below 500ppm and cyanuric acid ~50 ppm.
Why cant you maintain free chlorine in your pool?
Have you tested cyanuric acid ( stabilizer ) ?
Does metal conrol add cyanuric acid to swimming pool?
Most likely not.
Should you be using stabilized Chlorine in your pool everyday or is the Granular better?
Use stabilized chlorine only so long as stabilizer level (cyanuric acid level) in pool is within the recommended range of 50-80ppm.
