No, sodium bicarb is used to increase alkalinity. Cyanuric acid is used as a stabalizer. One is base the other acidic.
No. Two different acids.
Cyanuric acid is a stabiliser that stabilises chlorine and stops it from being burned of by the sun. Cyanuric acid and stabiliser are both the same product.
stabilzer
Remove some water in container (10-20%) and add new water. example: pump water high in cyanuric acid out of a swimming pool and the add fresh water to the pool.
Cyanuric acid is generally called chlorine stabilizer and it is used to prevent the suns UV rays from eating up the chlorine in outdoor pools. Because most spa's are covered when not in use this is generally not a concern for spa or hot tub owners. If you do however have an outdoor uncovered spa and you wish to raise the CYA level you would simply visit your local pool supply store and purchase some chlorine stabilizer, just ask for cyanuric acid and they will know what to get you.
cyanuric acid can react with melamine to create toxins in the body, melamine may be found in dairy products from time to time.
Cyanuric acid is not the same as muriatic acid. Cyanuric acid is odorless and white in color. It is used as a component of disinfectants, bleaches, and herbicides. Muriatic acid is clear solution of hydrogen chloride in water.
we used liquid chlorine to raise ours so far it has worked
Assuming no other complaints you would only need to change water to lower the total dissolved solids level or cyanuric acid level. TDS should be below 500ppm and cyanuric acid ~50 ppm.
Use Soda Ash to increase the PH level. Baking soda can be used to maintain the alkalinity of the pool water. Just the opposite!!!! Baking Soda will increase or raise the alk. Soda Ash raises the pH. Muriatic Acid lowers pH. k
A pool can show low levels of chlorine if the cyanuric level is below 50 ppm parts per million. Cyanuric acid or conditioner is important to allow clorione to stablise from ultraviolet light that breaks down chlorine. Chech to make sure you have the proper level of stabilasert (cyanuric).
C3H3N3O3