1. You simply store in a carpenters belt.
2. keep the face of the measurement block and the slide clean and well lubricated. This will help it slide on the surface of the workpiece smoothly and makes adjustments easier, a little carnauba wax (or Butcher's Wax) is perfect for this, for both steel block and wooden block marking gauges. Be sure to wipe away the excess with a clean cotton rag. Also, keep the points well sharpened, this allows them to cut through the wood grain rather than tear at it. For mortise marking gauges, be careful you don't change the distances between the two points by over cutting the points when sharpening them, keep the points centered on the pins.
3. waxing the blocks and slides will help protect steel gauges from rusting.
Examples of lining tools include the carpenterÕs pencil, the marking gauge, the chalk line and the awl. Basically, lining tools are used for marking locations.
NO
18 gauge is thicker than 20 gauge. 18 gauge is 1.27 mm thick while 20 gauge is .953 mm thick.
12 gauge.
16 gauge pipe is thicker than 19 gauge pipe.
A marking gauge is used for marking out lines to be cut.
A marking gauge is used for marking a bit of wood by using the screw at the end.
A marking gauge is used in woodwork and metalwork. A marking gauge is used to highlight or plan out lines that will be cut along. It is also called a Mortise gauge.
George Dunne invented the marking gauge with his giant head
A scriber is something that is a part of some instrument used for marking. A marking gauge is a device especially used for marking.
NAH
It is a marking gauge.
For marking a perimeter or edge of a piece of wood so you have a guideline to cut along.
The main parts of a Marking Gauge is the Fence and Stem. The fence is the adjustable part and th estem is what holds the spur.
The main advantages of using a marking gauge over a pencil and ruler is that you can repeat the settings on every workpiece that you mark out. (i.e. you can make an identical mark on each of the pieces you are working with).
Examples of lining tools include the carpenterÕs pencil, the marking gauge, the chalk line and the awl. Basically, lining tools are used for marking locations.
'I have a 12 gauge double barrel with the same marking. It also has an oval with a crown above it and 'ELG' as a marking that indicates Belgian. I will have my gunsmith have a look at it and see what they say..