You need 3 main things: An iron core, a roll of insulated copper wire and your source of electricity
Firstly find a suitable iron core a iron nail will do (6in 15cm) next wrap the wire (thicker is better) as neatly and tightly as you can around the iron nail.
Once the iron is wrapped up tight make sure you have a piece of copper wire comin off each end one where you began the other where you finished wrapping.
Now all you need to do is connect it to your battery which terminal you connect each wire will determine current flow.
The power of your electromagnet will depend on the wrapping of copperbut mainly the battery and the current it puts out to great a current will heat the wire quickly but a 9 or 12v battery should be fine.
This is not advised! The 9-volt charger might have a current limiter so that nothing burns up, but it any case if left on it will destroy the 6 volt battery by overcharging. A 6-volt charger is not expensive.
The value of internal resistance of 1.5 volt battery is 0.5 ohms.
I found this light http://www.ecolivingcentre.com.au/products-page/?product_id=23 and it is the perfect size and power for a torch we are making in graphics, the only problem is that it runs on 240 volt ac current and the torch im going to make is going to have a 12 volt dc lead acid battery, is there any way that you can make the battery work with this light
Nope.
no
Is a eletromagnet with a six volt lantern battery really powerful or not?
can 6 ,12 volt battery be wire to make in to one 24 volt battery for solar use in home
Not by connecting them directly, that'd be too powerful.
They make a 7.5 volt battery when put together
Install a 3 volt battery and forget any modifications. It will not operate on 12 volts.
You will need these materials: 5 volt battery 5 volt battery clip buzzer wires to connect
that is not possible and cant go from 6 volt to 24
No
if it is any think over 1 volt it is not a cell battery it is just a 6 volt battery if you had a 1 volt then it would be a cell battery
No, it will overcharge the 6 volt battery.
Add two 1 volt batteries in series with it.
The battery is a 12 volt.