easy
When we make the male thread, generally we use a die tool. When we make the female thread, we use a tap tool. If we do not have the suitable tools, we can also make the thread using a lathe. When we make the threads using the tap or the die, care should be taken in respect for the following. (1) Start the thread with a perpendicular positioning of the tap or the die. (2) Turn the tap or die in quarter turns and "back off" quarter turns to remove metal chips so that they don't clog the tool. (3) Always use a cutting oil.
The complement of rolling a die and getting a 4 is rolling a die and getting a 1, 2, 3, 5, or 6.
In general a female thread is cut with a tap. A male thread is cut with a die.
Probability of rolling an even number on a die is 1/2.
It is not!
The recommended rod size for the thread die chart is typically determined based on the specific thread size and pitch you are working with. It is important to refer to the thread die chart to find the appropriate rod size for your threading needs.
The answer depends on what the experiment is: drawing a card, rolling a die, with a spinner, ...The answer depends on what the experiment is: drawing a card, rolling a die, with a spinner, ...The answer depends on what the experiment is: drawing a card, rolling a die, with a spinner, ...The answer depends on what the experiment is: drawing a card, rolling a die, with a spinner, ...
rolling a die? 5/6
If rolling 1 die it is 1; if rolling 7 dice it is 0.
thread pitch, they even make guages for these, there always included in a tap and die set but you could likely find one at a hardware or automotive store
0.5
The probability of not rolling a 6 is 5/6.