First, lightly sand the poly to smooth out any bumps and to de-gloss the finish a bit. Use 120-180 grit sandpaper or sanding sponge. Or, you can apply a liquid sander instead of using sandpaper. This gives your primer something better to stick to. Next, apply a bonding primer - bonding primers are any primers made to stick to glossy surfaces (check the label). Oil- or water-based doesn't matter. Let dry. Then apply your finish paint in two separate coats (let the first coat dry before applying second coat).
you just mix red and blue White if you want to make it lighter.
Mix red and blue together. Add a bit of white paint.
with any other paint
With a Roller
almond DULUX paint
The three primary colours in painting are Red, Yellow & Blue. The secondary colours are the result of a mixture of two of the primary colours: Red & Blue - Purple; Red & Yellow - Orange; and Blue & Yellow - Green.
Paint some yellow and red close to the sun that's low in the horizon. Border them with white. all the rest: paint with ultramarine blue and white (that's a darker blue). When that's dry, brush a little bit of magenta over it. Make sure the 'land' part is not too light (it's in the shadow, and you're looking at the sun, so you're blinded by the light).
Typically, you would want to lay down the lightest colors on the canvas and then paint over the light colors with a darker color. It looks better because if you did it the opposite direction, the darker colors would still show through the lighter colors to a degree.
with orange and ava blue because their both light colors
well you can just buy light blue paint or you can get a dark blue paint and you can add white paint
You can mix a light blue, a dark blue, and a light green color to make a aqua colored paint. It makes a very nice blue green color that is perfect for a aquatic painting. :)
In paint they are red yellow and blue. In light they are red green and blue
Light purple
They wear a blue grease paint over latex bald caps
When you add colors of paint, you are adding the wavelengths of light that are absorbed by the paint. When you add light, you combine the wavelength that you see. For example, when you add green, red and blue light, you get white light because white is a combination of all light. When you add red, green and blue paint however, that means that all non-red, non-green and non-blue light is absorbed, which will leave you with nothing (black).
almond DULUX paint
The three primary colours in painting are Red, Yellow & Blue. The secondary colours are the result of a mixture of two of the primary colours: Red & Blue - Purple; Red & Yellow - Orange; and Blue & Yellow - Green.
white or red
yellow. but this is for light O N L Y . not in paint.
Unless a person is color blind it is very easy to tell if something is light blue. If you are looking for light blue paint, the paint tin should should have the color printed clearly on the container.
In regards to light it becomes Cyan. In regards to paint it becomes a light Turquoise.