You can make squishy putty by using borax, glue, and water! Mix a little of each together, add food colouring, and there you have it! Store in airtight container in fridge. Be careful, this putty stains!
yes it is found in lime yes it is found in lime.
A dull thud as it is a very soft metal, rather like putty.
Remove board and place horizontally on a waxed surface or waxed paper. Fill hole with spackling compound or putty using a putty knife. Tap brads (small nails) around perimeter of larger knotholes to hold putty. Choose pre-colored putty, or paint board when putty dries.
Water is added to quicklime the make slaked lime. Calcium hydroxide reacts with water to form calcium hydroxide. CaO + H2O --> Ca(OH)2
an easy way to make putty is by using 1 part liquid starch to 2 parts of Elmer's glue slowly pour the starch into the glue and mix them together cover your putty and place it in the refrigerator for 6-8 hours before using
When you slake a lime an leave it for a few months, there will be a layer of water (providing you used a sufficient amount) ontop of the slaked lime putty. this water is limewater and is clear but contains tiny particles in suspension. The putty is what we refer to as slaked lime.
Slaked lime putty is a traditional material used up until the introduction of Portland Cement in the mid 1800s. It is still used in restoration work. It is a base for plaster walls, stucco, and mortar for brick work, where the final product depends on the additives used. Very fine sand and sometimes hair is added for interior plaster, where coarser sand is used in masonry.
you put putty in the eggs
Get plain putty and put glow stuff on it
You can make squishy putty by using borax, glue, and water! Mix a little of each together, add food colouring, and there you have it! Store in airtight container in fridge. Be careful, this putty stains!
A mixture of borax, glue, and water to make a thickened solution called silly putty...
OK so first you make the putty then take like an extract for example cherry and you stretch out the putty then add one or two drops of extract and rub together. Glad to help YOU
you can either, wait for you putty machine to make some, buy putty with shiny from the shop under resources or attack a tribe/friends yard.
flour and water (:
Yes
I can think of no reason EVER to use quicklime in a gardening or agricultural context. One might use it to make a lime mortar for construction or rendering, or a lumpish or lime putty - but as an addition to soil? NO. IF you do use it wear protective gear - gloves and goggles at a minimum. I rarely wear goggles for any DIY, but I do when using 'quicklime'.