Want this question answered?
OK the heater is not letting the heat into the cab of my truck-I think the switch that controls the deflection doors is broken what is my answer the best thing to do.
The doors are electric. You most likely have a broken door inside the heater box under the dash.
it may be a number of things.... the air blend doors get brittle and break then they fall and lay over the heater core blocking the hot air .... or the air blend door actuator may have broken which does not allow the blend doors to switch from hot to cold ..or cold to hot ..... or the heater core itself cold have gone bad
Dirty contacts (if fitted) on the hatchback door. A broken door switch or broken door switch wire.
Depending on what year the car is the doors will automatically lock and what would cause them to unlock could be a faulty door latch There is a switch in the lock. probably that switch is broken in your car. If the inside lamp doesn't work when you open the door with that problem, that means the switch is broken.
Any of the following can cause this to happen and you will need to check them out... 1. Cracked, broken or vacuum line off.. 2. Bad a/c - heater controller.. 3. Bad a/c - heater internal air doors...
A door switch is broken or out of adjustment.
Check the following...................... 1. A/C heater control doors. 2. Check for vacuum leaks. 3. Check for broken a/c heater doors. 4. Check main controller head.
Turn the door switch located at the front of the overhead console to off.
Bad switch on one of the doors. When closed they depress the pin which breaks contact. If any one of these is out contact may not be broken when switch is depressed and complete circuit-keeping them on. Most are adjustable for pin height. Open each door one by one & depress manually to find it. one will probably do nothing.
Check for cracked vaccum line. Small line from engone compartment side through the firewall to the heater doors. The heater doors are controlled by vaccum.
The air doors maybe stuck. Or selector switch is not is not operating correctly.