You measure current by inserting an amp meter in series with the circuit or using a clamp-on meter to measure current by induction. You measure voltage with a volt meter across the supply. You measure resistance in ohms across the resistance. Luckily all these functions are in the same meter in most cases.
You connect a known voltage across the two points in the circuit, and measure the
current that flows between the points. The ratio (voltage) / (current) is the resistance
between those points.
V = I * R or I = ( V / R ) I = current (amps) V = Voltage R = Resistance The current in a circuit depends on the applied voltage and the resistance of the circuit.
A: A multimeter is an instrument design to measure ohms volts and amps. So to measure amps a shunt is provided to allow a sample of the current to be measured as a function of voltage.
You have to measure the voltage, and the current. The resistance is then calculated by using Ohm's Law.
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
Because V = I x R or Voltage = Current x Resistance. Since resistance is linear there is a linear relationship between Current and voltage. If you have DC voltage you have DC current and if you have AC Voltage you have AC current. Note that there is a linguistic recognition of this relationship in that the voltage is described in terms of the current.
The reason an AC voltage applied across a load resistance produces alternating current is because when you have AC voltage you have to have AC current. If DC voltage is applied, DC current is produced.
A multimeter has the ability to measure both AC and DC current along with voltage and resistance.
An oscilloscope is, essentially, a voltmeter -it measures current by measuring the voltage drop caused by that current across a standard resistance.
V = I * R or I = ( V / R ) I = current (amps) V = Voltage R = Resistance The current in a circuit depends on the applied voltage and the resistance of the circuit.
A: A multimeter is an instrument design to measure ohms volts and amps. So to measure amps a shunt is provided to allow a sample of the current to be measured as a function of voltage.
Measure the voltage V and current I and compute the unknown Resistance R=V/I.
You have to measure the voltage, and the current. The resistance is then calculated by using Ohm's Law.
current
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Ohms measure electrical resistance. The resistance in ohms is the voltage divided by the current.