Want this question answered?
You use calipers or a micrometer.
its tensile strength :P
A spring scale measures forces, such as weight or tension.
Cycle of elongation = Peptide bond Since you have to use (n-1) formula to calculate the peptide bonds 100-1=99 = cycle of elongation.
The cells produced by mitosis undergo a period of elongation in the direction of the axis of the root. It is at this time that they are sensitive to gravity and respond with gravitropism.
find it out . It's measured in the lab after a pull test. Steel elongation can be measure manually or using device called extentiometer. To measure elongation of steel manually we must give 2 punch marks on the specimen with specified length (see standard/code such as ASTM, ASME etc for specimen shape and size) addressed L0. After a pull test (tension/tensile test) we measure the distance between that 2 punch marks and addressed L1. Thus, the elongation of the specimen in percentage is ((L1-L0)/L0) x 100%. Measure elongation using extentiometer is lot more easier because we can directly read the result. But this method limited for small elongation measurement only.
A tension test in which a specimen is broken by applying in increasing load ot the two ends.During the test the elastic properties and ultimate tensile strength of the material are determined.After rupture the broken specimen may be measured for elongation and reduction area.
The answer depends on what causes the elongation: a stretching force (tension) or thermal expansion.
Hypotonia means "low tone," and refers to a physiological state in which a muscle has decreased tone, or tension. A muscle's tone is a measure of its ability to resist passive elongation or stretching.
You use calipers or a micrometer.
Notch is provided in the specimen for a charpy impace test because it helps measure the brittle fracture. It also helps stimulate the condition.
Strain is the measure of length change per unit length. Elongation usually refers to strain under load at failure point.
For example, the instrument to measure the force may have a spring. The elongation (extension) of the spring would be proportional to the force.
Tension = Module x deformation Deformation= 2,51x10^-3 = 0,25%
adhesion
Internodal elongation is stimulated by
strain is percent elongation/100; for example a strain of 0.02 is 2% elongation. Often we refer to elongation at failure; for example if a material fails at 10% elongation its strain is 0.10