Preferably with a multimeter. For amps you hook it up in series, for volts you hook it up in parallell. For Ohms, you'll need to have the item you want to measure separated fron the circuit.
It's watts divided by volts equals amps. Example: 1200 watts at 120 volts is 10 amps. To get the watts if you know the amps, multiply the amps times the volts. 10 amps at 120 volts is 1200 watts.
Amps measure the current flowing in a circuit, watts measure power output, and volts measure voltage difference. In an electrical system, volts x amps = watts, so they are related but measure different aspects of electricity. Volts represent the force pushing electrical current, while amps indicate the rate of flow, and watts show the total power consumed or produced.
Volts and amps measure two different things. Volts are used to measure potential difference. Amperes (amps for short) are used to measure current. Compare it to a garden hosepipe: Voltage corresponds to the pressure of the water, current measures how fast the water flows. 2000 millivolts equals two volts. For comparison, a single AA cell gives 1.5 volts. 1000 amps is several times the current used by the average household. A regular AA cell can provide, at maximum, about half an amp.
Milli amps is a measure of current whilst watt is a measure of power. The missing element is voltage as the formula is:- Power = Voltage * Amps ie power in Watts is the product of Volts (in Volts) times Amps (in Amps)
There is no direct conversion between cranking amps and volts. Cranking amps (CA) measure the amount of current a battery can provide for a short period, while volts measure the electrical potential difference. A battery's voltage is typically around 12 volts for a standard automotive battery.
2.3 ampAnother (correct) answer.Actually, Amps are a measure of current, and Volts are a measure of potential. Amps * volts = Watts.So if you aren't using any "watts", you don't have any Amps either.As asked, the question makes no sense at all.
Preferably with a multimeter. For amps you hook it up in series, for volts you hook it up in parallell. For Ohms, you'll need to have the item you want to measure separated fron the circuit.
A multimeter measures current in amperes and potential difference in volts. Wattmeters are used to measure watts and the reading is a combination of current being drawn and the voltage applied. watt = volts x amps
12 va These are two different entities. Its like asking how much water will flow with pressure. With the following formula W = Amps x Volts you can see the relationship they have with each other, the end product resulting in Watts.
Watts and amps measure different things, and they cannot be converted as asked. Watts measures power. Volts measures voltage and amps is a measure of current. The three electrical parameters are related by this formula: Power (watts) = volts times amps. If you know the voltage, then you can find the watt-to-amp ratio.
Amperes measure the rate of flow of electricity in a conductor Volts measure electrical pressure Watts measure the amount of energy or work that can be done by Amperes and Volts Relationship: Work = Pressure x Flow or Watts = Volts x Amperes When you know two variables you can calculate the other Formulas - This formula referred to as the West Virginia Formula (W - VA)Watts = Volts x Amps Volts = Watts / Amps Amps - Watts / Volts Refer to link below for more information
Watts = current x volts, so you have to multiply Kw value by 1000 to get watts, then divide by the applied voltage. examples. 2Kw kettle (U.S) current = 2 x1000 divided by 120, or 16.7 amps 2Kw kettle (UK) current = 2 x1000 divided by 240 or 8.35 amps 100 watt car amplifier current = 100 divided by 12 volts = 8.5amps