answersLogoWhite

0

How many amps in 220 volt?

User Avatar

Anonymous

12y ago
Updated: 11/18/2022

2.3 amp

Another (correct) answer.Actually, Amps are a measure of current, and Volts are a measure of potential.

Amps * volts = Watts.

So if you aren't using any "watts", you don't have any Amps either.

As asked, the question makes no sense at all.

User Avatar

Eloise Kuphal

Lvl 10
2y ago

What else can I help you with?

Related Questions

How do you compute the 2000 watts in 220 volt to how many amps?

watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps


How many amps in a 220 volt then hoe to measure it?

To determine the number of amps in a 220-volt circuit, you need to know the power (in watts) being used. The formula to calculate amps is: Amps = Watts / Volts. For example, if you have a device that uses 2200 watts on a 220-volt circuit, it would draw 10 amps (2200W / 220V = 10A). To measure the current (amps) directly, you can use a clamp meter or a multimeter set to the current measurement mode.


How many amps does a Hayward 1 Hp Pool Pump Motor use?

1 HP = 745.70 wattsPower (watts) = Current (amps) x VoltsSo if you use a 110 volt system, amps = 745.7/110 = 6.779 ampsIf you use a 220 volt system, amps = 745.7/220 = 3.389 ampsFor a 12 volt system, amps = 745.7/12 = 62.142 amps


How many amps are in 40 volt amps?

Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.


What is the maximum current capacity of a 220 volt 20 amp outlet?

The maximum current capacity of a 220 volt 20 amp outlet is 20 amps.


What is the recommended wire size for a 220 volt circuit according to the 220 volt wire size chart?

The recommended wire size for a 220 volt circuit according to the 220 volt wire size chart is typically 10 gauge wire for a circuit with a maximum of 30 amps.


How many amps does a 220 volt welder draw?

To determine the amperage drawn by a 220-volt welder, you can use the formula: Amps = Watts / Volts. For example, if the welder is rated at 5,000 watts, it would draw approximately 22.73 amps (5,000 watts / 220 volts). The actual amperage may vary based on the welder's specifications and settings. Always refer to the manufacturer's guidelines for precise information.


How many amps is 4800 watts at 220 volt?

To calculate the amperage, you can use the formula A = W / V, where A is amperage, W is watts, and V is voltage. Thus, for 4800 watts at 220 volts, the amperage would be 21.82 amps.


How many amps should a 220 volt well pump pull?

The amperage a 220 volt well pump will pull depends on the wattage of the pump. You can calculate it by dividing the wattage by the voltage (220V) to get the amperage. For example, a 1 HP well pump typically pulls around 8-10 amps at 220 volts.


Is it safe to use a 125volt 15a converter for 220 volt devices in a 120 volt country?

Yes, this can be done. The adapter will handle at 120 volts x 15 amps = 1800 watts. The adapter is just a step up transformer. The maximum 220 volt device that can be connected can only have an amperage rating of 8 amps at 220 volts.


Does a double 30 amp breaker mean you have 60 amps for a 220 outlet?

breakers are rated by wire size, not voltage. the appliance manufacturer will probably specify amperage.


How many amps will a 250 kVA transformer in 220 volts secondary?

To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.