just press the button and turn the codes fast and fast.
just press the button and turn the codes fast and fast.
From the samonsite website faq's Set / Reset 3-dial combination lock How do I set / reset my Samsonite or American Tourister 3-dial combination lock? Setting Your Samsonite or American Tourister 3-dial Combination Lock: 1. Remove the red packing arrow on the lock if your case has one. 2. The case is set to 0-0-0 at the factory. Choose your own 3 digits which you can easily recall (birthday, address, etc.). 3. Locate the button or lever adjacent to the dials: -If there is a button, push it towards the dial and hold while you rotate the dials to your desired setting, then release the button. - If there is a lever, move the lever to its lower position (some move to the right and up), rotate the dials to your desired setting, then return the lever to its original position. Your combination is now set to your 3-digit code.
If it has a 3 digit combination wheel, start a 000 and try to open it, then 001, 002, 003, etc all the way thru to 999. It takes time, it can be done.
Samsonite luggage locks are similar to cheap locks on a gas cap and can be opened with a little time and patience. The only thing you will need for this project is a drill and a 1/8 inch drill bit. Place drill bit inside lock hole and apply plenty of pressure to cut the metal. Once you have reached the core of the lock hole it will disengage the locking mechanism.
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
125
Forgot my password
If the case is new 0-0-0 will open it. If not you have to crack the combination which is not to difficult on a three digit lock. start with likely number sets if that doesn't work srart counting up from 000 to 999, it can't take that long.
bolt cutters....
maximum of 1000 combinations (10X10X10). Work with one lock and set it to read 000 . Count upward to 1000 by "ones". As you turn combination dial up with one hand, test if lock opens with other hand. Takes about 5 minutes and hopefully both locks are same combination.
slide the open button to the right hold and while holding it there , change the combination to what you like and release , u new combination is set.
You can crack a 3-digit combination lock by sequentially trying every possible number. Writing down and keeping track of every number used will help avoid confusion and speed up results.