their is a little slot in the grill next to a bolt on the drivers side stick a flat head screw driver in the slot and turn it like a key back and forth until you can lift the hood i have the same problem havent replaced it yet
HOW DO I OPEN HOOD ON CAR WHEN CABLE IS BROKEN
Hood release cable has connector nuts on both ends of the cable. Loosen the connector nuts. Remove the cable retainers. The cable will come off and can be replaced with a new hood release cable.
Sawsall
If it is just the plastic handle broken, behind that is the cable that opens the hood. Just grab the cable with a pair of pliers and pull. You can probably just replace the inside handle and not have to run a new cable.
If the hood release cable on your 1989 Chevy Celebrity is broken at the inside pull handle you can simply pull the cable out a bit, then cut off the outer housing leaving the center cable. You can pull on that bit of cable and unlatch the hood. If the cable is broken at the actual hood latch you could try: The grill is held on with six screws, remove them and take the grill out. Then use a hook and reach in between the top of the radiator support bracket and the bottom of the latch mechanism and catch the lever with the hook. Pull the lever and release the latch. This may take multiple tries to get it right. Of course you want to change the cable as soon as possible, these methods become real nuisances quickly.
how to get a 2001 isuzu trooper hood open if release cable is broken
To open the hood on the 2000 Beetle if the hood release lever is broken inside the car, you can remove the glove compartment of the vehicle and find the release cable inside the dashboard. Pull the cable to open the hood. You will then need to replace the hood release lever.?æ
If the cable release is broken for the hood on a 2002 Kia Spectra, a person could crawl under the car and see if they can locate the broken part of the cable. If it is still attached to the hood, they could pull it to trip the hood latch. Otherwise, the car will have to be put on a hoist, and a long pole used to trip the hood latch.
Try using a coat hanger with the ends cut off and bend it into shape to get under the hood and pull the cable release.
Our 2004 Saturn Vue hood release can be opened (if the cable is not broken) by disconnecting the cable from the back of the release lever, grabbing the ball on the end of the cable with some large pliers ("channel locks") and pulling hard. A metal "wire keeper" bracket clamped to the cable end under the hood to serve as a spacer and the release lever works.
where your latch is broken at you can use a pair of pliers and pull the exposed cable wire and it should open best thing when u open it replace the cable wire
That depends on a few things. If the cable has broken at the release handle, you can use Vice Grips or pliers to grab the end of the cable and pull. If the hood is stuck down you can have a helper pull up on the hood while you work the release in the car. If the cable has broken at the latch consult a pro for help. If you get a helper to hold the the hood release open on the inside and tap lightly, with the side of your fist, on the front of your hood just above the grill. This will usually work if the cable is not broken.