Want this question answered?
can some 1 help me as i dunno if i shud buy this mondeo td 130 bhp 51 plate!! please help :)
The bonnet catch is in the foot well on the passenger side near the door but high up. Pull it to release the catch then put your fingers between the gap of the slightly open bonnet lid in the middle. You will find a small plate that needs to pushed up ton release the lid.
I am looking for a bonnet lock plate and bonnet hingers for 1966 f350
We saw 36~38 around town, 42+ on longer runs. Now getting 50+ with an 07 plate 2TDCI Mondeo. We saw 36~38 around town, 42+ on longer runs. Now getting 50+ with an 07 plate 2TDCI Mondeo. We saw 36~38 around town, 42+ on longer runs. Now getting 50+ with an 07 plate 2TDCI Mondeo.
stamped on a plate under the bonnet
My 02 plate 2 ltre TDCI has a chain
try changing the bulb, you can get them from halfords
The belt on a Mondeo TCDI Duratorq 56 plate is part of the timing chain/belt. The timing chain and belt should be checked at 100K miles. The belt and the chain work together in the running of the engine.
yes, a vice has one stationary plate and one plate attached to a screw with a lever at the end. As you turn the lever the screw turns subsequently moving the attached plate.
No the immobilser is built into the ECU from factory
on the top of the turbo '02 plate will have a rubber hose connected to it
mondeo 1.8 mk3 right side of battery and there are 4 cubes 1st left side and under 1