Want this question answered?
To open a door on a 1998 Avenger that has a broken handle, a person might have to use another door to gain entry to the vehicle. Then the door can be opened from the inside.
Broken door handle. replace it.
You don't...
The usual reason that a door will not open from the inside on a Nissan truck is because the door handle is broken on the inside. The door panel will have to be removed and the door handle repaired or replaced to open the door from the inside again.
the cast iron piece is broken on the handle just had to change one
The plastic inside door handle is probably broken.
how do I open a door when the handle broke and the part theat connects into the outer wall will not release?
You have to take the inside handle apart to activate the latch manually. If you can't do it from the handle area you have to remove the inside door panel.
The problem is that the inside door handle is broken. Although the inside door handle needs replacement you can still open the door by pulling on the lock lever above the handle.
You can use a "Jimmy" tool to open the door. The same way a Tow Truck Driver (or a thief) would do it. After you unlock the door with the Jimmy, use the Jimmy to reach the door handle and move it until it opens. Good luck!
If its the cables inside you need to remove the panels and replace the cables. You can in a pinch just disconnect them from the handle. Then pull them to release the door.
I just ha d da handle break on my Maytag.. work da door left right gently BAck forth should break loose