0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you open the bonnet?
AnswerThe Bonnet is called the Hood in the U.S. Pull the lever inside the car, on drivers side. Then release the hood (bonnet) with the lever located in the front grille.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
Fuse which controls power steering for fiat punto?
fuse for power steering on fiat punto if your looking for the fuse under the bonnet big black box on the right open up the box and you will see the big blue fuse in the middle of the top row .
How do you open the bonnet of a fiat brava elx when the latch is broke?
There should be a cable hanging down from where the latch was. Just grip with a pair of pliers and give it a gentle pull. You will hear a click and then you can release and go to the front of the car and open the bonnet.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
How do you open the bonnet on a Fiat coupe?
Pull the handle on the drivers side to release it and then put your hand - palm up - through the gap at the front of bonnet in the middle so your fingers can lift the final release handle. If the gas struts are u/s then it will be very heavy to lift.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.Go to related links below.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
How do you open the bonnet of your Fiat 500?
The latch release lever is on the driver's side on the floor next to the door. If the level is slack it points to a snapped bonnet release cable. To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car. Jack up the car, placed it on a stand on the passenger side, and reached up underneath. Watch the video: http://bit.ly/Yh1dQ9
How can you open the bonnet on a fiat punto 75 sx when the wire has snapped?
It is possible open the bonnet still...however this technique may also be used for other, less welcome, activites under the bonnet. The best way to get the answer would be to search on FiatForum...it is covered there. The basics of the technique involve having long arms and a torch to see where you're putting your hand.
How do you open the bonnet on a Fiat uylsees?
In a Fiat Punto - the level is under the dash, on the drivers side, near the footwell, simply pull / lift the bottom of the lever towards you.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation, you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9
How do you open a bonnet on 2003 peugeot 306?
The bonnet release lever is at the foot of the front passenger.
How do you open the bonnet Fiat coupe?
I had this problem on my fiat 20v turbo after the bonnet cable snapped.You will need a long flat head screw driver.Look between the top slats on the grill and you can see the bonnet catch (the bit where the cable attaches)Slot the screw driver in between the nut attached to the cable and pull to the leftthis should open the bonnet be very care fully not to puncher the radiatorI found doing the above at night with a torch easier as you can see the end of the cable betterFor a Fiat Punto, you'll need to get under the car - it might be the same for the coupe.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9
How can you open the bonnet hood on a Fiat Punto when the release cable does not work?
We had a broken cable on 2004 fiat punto. It had rusted through! The bonnet would not open. Because the bumper wraps under the front of the car and the top bolts holding the bumper are under the bonnet there is a problem. The prats at a Fiat main dealers told us that when this happens you have 2 alternatives. 1. smash the bumper off and buy a new bumper or 2 cut a hole in the bonnet and buy a new bonnet. Nothing changes does it with the so called 'machanics' at main dealers!. What we did was this. Just above where the number plate on the bumper is an air intake slot that has 2 unseen vertical pillars. We carefully sawed through these pillars which allowed us to carefully pull open the intake slot. This allowed us to get a hand up to trigger the catch. We used a small high pressure inflatable airbag to do this so we did not damage the front surface of the bumper, but one person pulling it open and another putting the hand up would work. When we released the air pressure you could not see where the pillars had been cut nor could we see that cutting these pillars weekened the structure of the bumper. Good luck.It so easy.Just get on your back under the car, get a torch and locate where the cable enters under the bonnet (it comes in from the nearside and goes into bonnet just above the radiator). Grab the outer cable and push it towards the center of the bonnet (towards the drivers side). Vuala the bonnet will open.
How do you remove Fiat punto door?
open the door then drive into it with another car and it should remove it safely if not just use a hammer
How do you open the bonnet on a Ford Mondeo 2003?
On the bonnet, slide the Ford oval and insert the ignition key into the lock located there
