Want this question answered?
call a mechanic
pull the corde from near your pedals
no as it is hydrolic and these sort of clutches are non adjustable were as cable clutches you could adjust them.
well u need to find the broken end of the cable that's still attached to the bonnet release then u need to pull the wire that is INSIDE the black insulation easy enough with a pair of pliers or vice grips but i suggest u fit a need a cable to save hassle in the future
get another person to pull the handle, and thump the bonnet/hood at the front in the middle, but not hard enough to dent the metal. If the catch is just a bit stucky due to lack of use this should shake the bonnet open. Then lubricate the mechanism, and open it more than once a year!
how do you fix a vauxhall astra hand break cable
Lock stuck or cable broken. You will need to get into the boot space throught the back seat and remove as much trim as needed until you can see the lock then open it from there manually.
cable
If it has rear drum brakes, it's under the car, where the handbrake cable emerges from inside the car. If it has rear disk brakes, there is addition adjustment inside the rear disks on the handbrake shoe mechanism. This adjustment should be carried out before attempting to adjust the cable.
There should be a cable hanging down from where the latch was. Just grip with a pair of pliers and give it a gentle pull. You will hear a click and then you can release and go to the front of the car and open the bonnet.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
Reach up from under car hold cable and push toward bonnet catch
get a pair of long nose pliers, to the left of the bonnet lock (as you look at it) is the bonney cable, insert the pliers through the grill to get hold of the cable and push it to your right, towards the lock and the bonnet should pop. the just release the catch and it should open.