Want this question answered?
The plastic cover will pop off. Then remove bulb.
Just take the cover off and plug in the new bulb.
Take a small screwdriver, gently pry the cover off. Slight downward pressure will remove the old bulb.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
The 3M 2000 body won't get hot to the touch, but if the bulb cover is removed, the bulb can easily cause a serious burn.
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
With a small screwdriver, pry off the lens that covers the buld. Similar to most interior overhead bulb covers.
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
In order to change the replacement lamp in an overhead projector one must first turn the power off, then remove the burnt out bulb by squeezing the two metal bars together, finally one can simply insert the replacement bulb and latching the top down.
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.
Clear lense pops off with a small screwdriver. Front side first, then the sheetmetal cover does the same thing, just unclip the left side of cover first.
To replace the bulb for the interior light of a car, one should remove the lens cover, remove the burnt out bulb, inspect the socket for dirt or corrosion, inspect the lens cover for damage, check for loose wires then install the new bulb and replace the cover.