you have to play crew challenge and make about 7 stars or more ( u do this after u unlock the glitterati and the robots )
To determine if the Nikon MC-DC2 is compatible with your camera model, please refer to the camera's user manual or contact Nikon customer support for assistance.
Should be under dash somewhere driver's side.
The OBD connector on a Honda DC2 Type R is located under the driver's side dashboard, near the steering column. It is typically found above the pedals and may be secured by a plastic cover or panel. You may need to remove that cover to access the connector for diagnostic purposes.
not likely if your talking about 1991 as being the DA integra and the 1996 as being the DC2
Reebok returns footwear distribution center (dc2) 495 cedar crest rd Spartanburg Sc 29301
integra DA is just the "code name" i guess you can say of a 90-93 integra. for example, DC2 is for 94-01 integra, DC5 is for the RSX....etc....
To use a MC-DC2 remote with a Nikon D5000, first, ensure the camera is set to the remote control mode by going into the menu settings and selecting the appropriate option. Then, point the remote towards the camera's infrared sensor, which is located on the front of the camera. Press the remote's button to trigger the shutter, allowing you to take photos without physically touching the camera. This is especially useful for reducing camera shake during long exposures or when using a tripod.
Connect it to the blue wire on the distributor.Blue wire on the distributor:http://www.jdmuniverse.com/forums/acura-integra-integra-type-r-da-dc2/91736-need-help-wiring-my-jdm-cluster.htmlb18 distributorhttp://www.importtuner.com/tech/impp_0602_honda_civic_b18_cams_install/photo_13.html
The best cable release option for the Nikon D90 camera is the Nikon MC-DC2 Remote Release Cord. It allows you to remotely trigger the camera's shutter, which is useful for long exposure photography or when you want to avoid camera shake.
The changes done to an object are replicated to all the DCs in th domain.Th infrastructure master and GC are updated with change in objects attribute with help of timpstamp and usn number which is incremented each time a change happens and information is replicated to all DCs .during replication the dcs compare the time stamp and usn number if the value is higher on DC2 then the DC 2 will initiate the replication to all other DCs.
Yes you can repair it at following places 1.Capitol Chimney Service (202) 497-6530 16 St, Washington, DC2.RC Duct Cleaning (301) 839-0264 Washington, DC3.Acd Chimney Service (202) 332-8331 3865 Halley Ter Se, #302, Washington, DC4.American Professiona Chimney & Masonry Service (202) 483-0440 730 12th St Nw, Washington, DC
Pastor, The best way to find what you are searching for is to speak with a military museum. The director of one of the finest in the area is in Ruston,La. His name is Ernie Stevens, and he runs the Military Museum in Ruston. Look him up under Lincoln Sheet Metal and Roofing. Let me know if I can help you. Jimmy Lynch DC2, USN SGT, LAARNG 318-548-4700