0
There is 0.5 moles of NaOH per litre To calculate 0.5 molar NaOH first know the molecular weight of NaOH i.e 40 now multiply the number of moles of NaOH you have (0.5) found as above. so to find the number of grams of NaOH we needed to start with (0.5) * (40) = 20g So dissolve 20g of NaOH in one litre of the solution to prepare 0.5 molar solution
What else can I help you with?
How do you prepare 1 N to 0.1N NaOH solution?
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
How do you prepare 10 N of NAOH?
To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.
How can you prepare 0.02 N NaOH solution if i have .2N NaOH?
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
How do you get a 2.5 N NaOH solution in methanol?
To prepare a 2.5 N NaOH solution in methanol, you would first calculate the amount of NaOH needed based on its molar mass and the desired concentration. Then, dissolve this amount of NaOH in the appropriate volume of methanol to make the 2.5 N solution. Be sure to wear appropriate safety gear and follow proper handling procedures when working with NaOH.
How to prepare 6N NaOH?
To prepare a 6N NaOH solution, you would need to dissolve 240 grams of sodium hydroxide (NaOH) pellets in enough distilled water to make 1 liter of solution. This will result in a 6N (Normal) solution of NaOH. Remember to handle NaOH with caution as it is a strong base and can cause burns.
How do you prepare 1 N to 0.1N NaOH solution?
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
How do you prepare 10 N of NAOH?
To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.
How can you prepare 0.02 N NaOH solution if i have .2N NaOH?
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
How do you prepare 2 liters of 0.75 N Na OH?
Take 60 gm NaOH (100%) disolve it in distilled water, and make up to 2.0 liter by distlilled water.the prepared solution is 0.75 N NaoH Solution.
How do you get a 2.5 N NaOH solution in methanol?
To prepare a 2.5 N NaOH solution in methanol, you would first calculate the amount of NaOH needed based on its molar mass and the desired concentration. Then, dissolve this amount of NaOH in the appropriate volume of methanol to make the 2.5 N solution. Be sure to wear appropriate safety gear and follow proper handling procedures when working with NaOH.
How to prepare 6N NaOH?
To prepare a 6N NaOH solution, you would need to dissolve 240 grams of sodium hydroxide (NaOH) pellets in enough distilled water to make 1 liter of solution. This will result in a 6N (Normal) solution of NaOH. Remember to handle NaOH with caution as it is a strong base and can cause burns.
1n naoh solution preparation from 10n naoh?
To prepare a 1N NaOH solution from a 10N NaOH solution, you can dilute it by adding 1 part of the 10N NaOH solution to 9 parts of water. Measure the volume of the 10N NaOH solution needed based on the amount of 1N NaOH solution you want to prepare. Always add the concentrated solution to water slowly and mix well.
How will prepare 200ml of 10 percent NaOH Solution?
Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...
How do you prepare 0.01 N NaOH from 0.02 N NaOH?
Since "normality" is defined as the gram equivalent weight of a substance in a liter of solution, a 0.02 N NaOH solution would have 0.02 gram equivalents of NaOH per liter. To reduce it to 0.01 N you need only dilute it to one half of the original - e.g. 500 ml of NaOH mixed with 500 ml of pure water. Because there is a small change in the density upon mixing, the exact amount of water will differ slightly from 500 ml, but for a solution as dilute as 0.02 N, it won't be that far off. The best way to get it exact would be to start with a known volume of 0.02 N NaOH and then add enough water to bring the total to exactly twice the original volume. This might be accomplished by doing it in a graduated cylinder or adding it from a burette into a volumetric flask. the important thing is to know the starting volume of the 0.02 N solution and the final volume of the diluted (0.01 N) solution
What is the calculation for 0.1 N naoh solution?
To calculate the concentration of a 0.1 N NaOH solution, you need to know the molar mass of NaOH which is approximately 40 g/mol. Since 1 N solution is equivalent to 1 gram equivalent weight of the solute dissolved in 1 liter of the solution, a 0.1 N NaOH solution would contain 4 g of NaOH per liter of solution.
Prepare 0.5 N solution of NaOH?
1. Weigh 20 g NaOH. 2. Put this NaOH in a 1 L volumetric flask. 3. Add slowly 200 mL distilled water and stir. 4. Put the flask in a thermostat at 20 0C and maintain for 1 hour. 5. Add distilled water up to the mark. Stir vigorously. 6. Standardize the solution by titration with oxalic acid, potassium hydrogen phtalate, etc. 7. Transfer the solution in a bottle and apply a label (date, name of the operator, name of the solution, normality).
How can you prepare 0.02 N NaOH solution?
- Weight 0,4 g of NaOH - Transfer the granules in a 1 L volumetric flask - Add 9oo mL distilled water; maintain the flask in a thermostat at 20 0C, for min. half hour - Add distilled water up to the mark - Stir the content To know the correct concentration this solution must be titrated with an acid.
