0
What else can I help you with?
How can prepare .01N KBr solution?
To prepare a 0.01N KBr solution, dissolve 0.74g of KBr in 1 liter of water. This will give you a solution with a molarity of 0.01N for KBr.
How can we Prepare 1mM NaOH?
To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.
What amount of NaOH is required to prepare 1N NaOH solution and why only that amount is used?
To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.
How an exact of 0.1N solution of NaOH can be prepared?
To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.
HOW TO 0.1N NaOH solution preparation?
To prepare a 0.1N NaOH solution, dissolve 4g of sodium hydroxide (NaOH) pellets in enough water to make 1 liter of solution. Use a volumetric flask to accurately measure the final volume. Remember to handle NaOH with caution as it is a caustic substance.
How can prepare .01N KBr solution?
To prepare a 0.01N KBr solution, dissolve 0.74g of KBr in 1 liter of water. This will give you a solution with a molarity of 0.01N for KBr.
How can we Prepare 1mM NaOH?
To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.
What amount of NaOH is required to prepare 1N NaOH solution and why only that amount is used?
To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.
How an exact of 0.1N solution of NaOH can be prepared?
To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.
HOW TO 0.1N NaOH solution preparation?
To prepare a 0.1N NaOH solution, dissolve 4g of sodium hydroxide (NaOH) pellets in enough water to make 1 liter of solution. Use a volumetric flask to accurately measure the final volume. Remember to handle NaOH with caution as it is a caustic substance.
How you prepare 0.02M NaOH solution?
To prepare a 0.02M NaOH solution, weigh out 0.08g of NaOH (based on its molecular weight) and dissolve it in enough water to make 1 liter of solution. Remember to wear appropriate safety gear like gloves and goggles when handling NaOH due to its caustic nature.
How can prepare 10ppm NaOH solution?
To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
How do you prepare 10 N of NAOH?
To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.
How much NaOH required for 1 normal solution?
To prepare a 1 normal solution of NaOH, you would need to dissolve 40.00 grams of NaOH in enough water to make 1 liter of solution. This is because the molecular weight of NaOH is 40 g/mol.
1n naoh solution preparation from 10n naoh?
To prepare a 1N NaOH solution from a 10N NaOH solution, you can dilute it by adding 1 part of the 10N NaOH solution to 9 parts of water. Measure the volume of the 10N NaOH solution needed based on the amount of 1N NaOH solution you want to prepare. Always add the concentrated solution to water slowly and mix well.
How will you prepare 1 percent naoh?
To prepare a 1% NaOH solution, you can mix 1 part of NaOH (sodium hydroxide) with 99 parts of water by weight. For example, to prepare 100 mL of 1% NaOH solution, you would dissolve 1 gram of NaOH in 99 grams of water. Remember to always add NaOH to water slowly while stirring to avoid splattering and heat generation.
How to prepare 6N NaOH?
To prepare a 6N NaOH solution, you would need to dissolve 240 grams of sodium hydroxide (NaOH) pellets in enough distilled water to make 1 liter of solution. This will result in a 6N (Normal) solution of NaOH. Remember to handle NaOH with caution as it is a strong base and can cause burns.
