To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.
To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.
To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.
To prepare a 0.02M NaOH solution, weigh out 0.08g of NaOH (based on its molecular weight) and dissolve it in enough water to make 1 liter of solution. Remember to wear appropriate safety gear like gloves and goggles when handling NaOH due to its caustic nature.
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.
To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.
To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.
To prepare a 0.02M NaOH solution, weigh out 0.08g of NaOH (based on its molecular weight) and dissolve it in enough water to make 1 liter of solution. Remember to wear appropriate safety gear like gloves and goggles when handling NaOH due to its caustic nature.
To prepare a 0.1N NaOH solution, dissolve 4g of sodium hydroxide (NaOH) pellets in enough water to make 1 liter of solution. Use a volumetric flask to accurately measure the final volume. Remember to handle NaOH with caution as it is a caustic substance.
To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.
To prepare a 30% NaOH solution, you would mix 30 grams of NaOH with enough water to make 100 grams of final solution. Be sure to use caution when handling NaOH as it is a caustic substance and can cause skin and eye irritation.
To prepare a 6N NaOH solution from a 10N NaOH solution, you would dilute the 10N solution by adding water. Use the dilution formula: C1V1 = C2V2, where C1 is the initial concentration (10N), V1 is the volume of stock solution needed, C2 is the final concentration (6N), and V2 is the final volume of the solution you want to make. Calculate the volume of the 10N solution needed and add water to reach the final desired volume for a 6N NaOH solution.
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.
Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...
To prepare 0.02M NaOH from 1M NaOH solution, you will need to dilute the 1M solution. Use the formula: C1V1 = C2V2, where C1 is the concentration of the stock solution (1M), V1 is the volume of the stock solution you will use, C2 is the desired concentration (0.02M), and V2 is the final volume of the diluted solution. Calculate the volume of 1M NaOH solution (V1) needed to make the desired 0.02M concentration and dilute it with water to reach the desired volume (V2).