answersLogoWhite

0

Dissolve (by adding carefully) 10 grams of sodium hydroxide in 900 mL disilled water and then fill it up to 1 Litre (or more exact: fill it up to 1 kg).

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Chemistry

How can we Prepare 1mM NaOH?

To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.


How do you prepare 30 percent of NaOH?

To prepare a 30% NaOH solution, you would mix 30 grams of NaOH with enough water to make 100 grams of final solution. Be sure to use caution when handling NaOH as it is a caustic substance and can cause skin and eye irritation.


HOW TO 0.1N NaOH solution preparation?

To prepare a 0.1N NaOH solution, dissolve 4g of sodium hydroxide (NaOH) pellets in enough water to make 1 liter of solution. Use a volumetric flask to accurately measure the final volume. Remember to handle NaOH with caution as it is a caustic substance.


How do you prepare 1 N to 0.1N NaOH solution?

To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.


What amount of NaOH is required to prepare 1N NaOH solution and why only that amount is used?

To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.

Related Questions

How can we Prepare 1mM NaOH?

To prepare 1 mM NaOH solution, you would dissolve 0.040 g of NaOH in enough water to make 1 liter of solution. This concentration is equivalent to 1 millimole of NaOH per liter of solution. Be cautious when handling NaOH as it is a caustic substance.


How do you prepare 30 percent of NaOH?

To prepare a 30% NaOH solution, you would mix 30 grams of NaOH with enough water to make 100 grams of final solution. Be sure to use caution when handling NaOH as it is a caustic substance and can cause skin and eye irritation.


HOW TO 0.1N NaOH solution preparation?

To prepare a 0.1N NaOH solution, dissolve 4g of sodium hydroxide (NaOH) pellets in enough water to make 1 liter of solution. Use a volumetric flask to accurately measure the final volume. Remember to handle NaOH with caution as it is a caustic substance.


How do you prepare 1 N to 0.1N NaOH solution?

To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.


What amount of NaOH is required to prepare 1N NaOH solution and why only that amount is used?

To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.


How can prepare 10ppm NaOH solution?

To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.


How an exact of 0.1N solution of NaOH can be prepared?

To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.


How you prepare 0.02M NaOH solution?

To prepare a 0.02M NaOH solution, weigh out 0.08g of NaOH (based on its molecular weight) and dissolve it in enough water to make 1 liter of solution. Remember to wear appropriate safety gear like gloves and goggles when handling NaOH due to its caustic nature.


How do you prepare 10 N of NAOH?

To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.


How will prepare 200ml of 10 percent NaOH Solution?

Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...


How do you prepare a 50 percent of NaOH solution?

To prepare a 50% NaOH solution, dissolve 50g of NaOH pellets in 50mL of distilled water. Slowly add more water while stirring until you reach the desired volume. Make sure to wear appropriate protective gear and handle NaOH with care due to its caustic nature.


How to prepare 6N NaOH?

To prepare a 6N NaOH solution, you would need to dissolve 240 grams of sodium hydroxide (NaOH) pellets in enough distilled water to make 1 liter of solution. This will result in a 6N (Normal) solution of NaOH. Remember to handle NaOH with caution as it is a strong base and can cause burns.