0
To prepare a 10 N solution of NaOH, you would dissolve 400 g of NaOH pellets in enough distilled water to make 1 liter of solution. Remember to add the NaOH to the water slowly and carefully due to the exothermic nature of the reaction. Finally, stir the solution until all of the NaOH has fully dissolved.
What else can I help you with?
How can you prepare 0.02 N NaOH solution if i have .2N NaOH?
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
How do you prepare 1 N to 0.1N NaOH solution?
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
How can prepare 10ppm NaOH solution?
To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
How to prepare 2N solution of NaOH in 10 ml of water?
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.
How do you prepare 10 ml of 1M naoh?
To prepare 10 ml of 1M NaOH solution, you would need to dissolve 0.4 grams of NaOH (molar mass of NaOH is 40 g/mol) in enough distilled water to make a total volume of 10 ml. First, measure out 0.4 grams of NaOH using a balance. Then, add this solid NaOH to a small beaker and add distilled water while stirring until the total volume reaches 10 ml. Make sure to handle NaOH with care as it is a caustic substance.
How can you prepare 0.02 N NaOH solution if i have .2N NaOH?
In order to make 0.02 N NaOH from 0.2 N NaOH, one needs to dilute it by 10 x (10 fold). Depending on the volume of 0.02 N NaOH needed, that will determine the volume of 0.2 N used. For example, to make 100 ml of 0.02 N NaOH, you would dilute 10 mls of 0.2 N to 100 ml. This is seen in the following calculation: (x ml)(0.2 N NaOH) = (100 ml) (0.02 N NaOH) and x = 10 ml
How do you prepare 1 N to 0.1N NaOH solution?
To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.
How will prepare 200ml of 10 percent NaOH Solution?
Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...
How can prepare 10ppm NaOH solution?
To prepare a 10 ppm (parts per million) NaOH solution, you would need to dissolve 10 mg of NaOH in 1 liter of water. This concentration is achieved by adding a very small amount of NaOH to ensure the solution contains 10 parts of NaOH for every 1 million parts of water. Be sure to wear appropriate safety gear and handle NaOH with caution.
How to prepare 2N solution of NaOH in 10 ml of water?
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.
How do you prepare 10 ml of 1M naoh?
To prepare 10 ml of 1M NaOH solution, you would need to dissolve 0.4 grams of NaOH (molar mass of NaOH is 40 g/mol) in enough distilled water to make a total volume of 10 ml. First, measure out 0.4 grams of NaOH using a balance. Then, add this solid NaOH to a small beaker and add distilled water while stirring until the total volume reaches 10 ml. Make sure to handle NaOH with care as it is a caustic substance.
1n naoh solution preparation from 10n naoh?
To prepare a 1N NaOH solution from a 10N NaOH solution, you can dilute it by adding 1 part of the 10N NaOH solution to 9 parts of water. Measure the volume of the 10N NaOH solution needed based on the amount of 1N NaOH solution you want to prepare. Always add the concentrated solution to water slowly and mix well.
How to prepare 6N NaOH?
To prepare a 6N NaOH solution, you would need to dissolve 240 grams of sodium hydroxide (NaOH) pellets in enough distilled water to make 1 liter of solution. This will result in a 6N (Normal) solution of NaOH. Remember to handle NaOH with caution as it is a strong base and can cause burns.
How do you get a 2.5 N NaOH solution in methanol?
To prepare a 2.5 N NaOH solution in methanol, you would first calculate the amount of NaOH needed based on its molar mass and the desired concentration. Then, dissolve this amount of NaOH in the appropriate volume of methanol to make the 2.5 N solution. Be sure to wear appropriate safety gear and follow proper handling procedures when working with NaOH.
How do you prepare 2 liters of 0.75 N Na OH?
Take 60 gm NaOH (100%) disolve it in distilled water, and make up to 2.0 liter by distlilled water.the prepared solution is 0.75 N NaoH Solution.
How can you prepare NAOH 0.25N?
To prepare a 0.25N solution of NaOH, you can dissolve 10 grams of NaOH in sufficient distilled water to make 1 liter of solution. Use a volumetric flask to accurately measure the volume of water. Remember to wear appropriate personal protective equipment and follow safety protocols when handling NaOH as it is a caustic substance.
How many moles of HNO3 are needed to prepare 5.0 liters of 2.0m soultion of HNO3?
Concentration of NaOH = 0.025 M = 0.025 Moles per Litre of SolutionVolume of Solution required = 5.00LWe can say therefore that:Number of Moles of NaOH needed to prepare the solution= Concentration of NaOH * Volume of Solution requiredTherefore:Number of Moles of NaOH needed to prepare the solution= 0.025M * 5.00L= 0.125molesFrom this we can say that 0.125 moles of NaOH are needed to prepare a 5.00 L solution with a concentration of 0.025M of NaOH.
