Want this question answered?
5ml of the 1000 ppm solution in 95ml distilled water gives a 500ppm solution
You prepare a solution by dissolving a known mass of solute into a specific amount of solvent. In solutions, M is the molarity, or moles of solute per liter of solution. For 300 ml of a 0.1 M Na CL solution from a solid Na CL solution and water you need water and sodium chloride.
Just take 3 grams and add this to 1000 litres (= 1,000 kg = 1,000,000 (million) grams)
5 mg of an element or compound in 1 L of solution
is a quarter a solid solution
how to prepare 1000 ppm solution of nickel carbonate
You prepare a primary solution then dilute portion of your solution down to the required concentration. For example, you want a 10 ppm salt solution (10 mg/L), you dilute 1 g of salt in 1 L of water you get 1000 ppm salt solution. You take 10 ml of your salt solution (0.01 g salt in 10 g) and add in additional 980 ml of water then you get a 10 ppm weight solution.
Assuming that you are referring to PPM as (parts per million), you can prepare a report on the solution, depending on the different ingredients that are involved and quantity of each substance present.
dilute it 1 in 5000. likely best done with a serial or step dilution
Dear friends, PPM means Part Per Millions, So It means if you takes 1 gm of Solid Chloride Ions and Dissolve it in D. water. The Current Stock solution is having 1000 PPM of Chloride Ions. NOW if you want lesser PPM solution from this stock Solution, follows below rule- Required PPM Solution (A) ---------------------------------- X Required Volume of A PPM solution === Nos. of mL Stock Solution PPM (1000) to be taken from this stock solution and add in required Volume. Dr.P.Khemariya Research Scientist R&D dr.p.khemariya@gmail.com
Make a 1 to 100 dilution of the original 1000 ppm solution. That is take 1 ml and dilute to 100 ml, or take 10 ml and dilute to 1000 ml. This will give you a 10 ppm solution.
1 ppm is 1 mg per litre so you need to weigh out the amount of zinc sulfate that contains 10mg i.e 0.01g SO4 which is 287.4/32 =8.98125g ZnSO4-7H2O and add to a 1 lt volumetric flask and dilute with water to 1 litre.
A solution of ammonia can be used to prepare ammoniumsulfate by reacting it with a solution of sulfuric acid to produce a solution of ammonium sulfate, which can be dried if desired to prepare solid ammonium sulfate.
add 2.4ml glacial aetic acid in one liter of d.m water
5ml of the 1000 ppm solution in 95ml distilled water gives a 500ppm solution
In order to prepare 500 ppm of lead solution from lead nitrate dissolve 0.799 gm of lead nitrate in 1000ml of water--add 1 or 2 drops of nitric acid.
Parts per million (ppm) is the same as mg/L. So, dissolve 5 mg of NaOH in 1 L of water and viola!