Sit in the car with the doors shut and unlocked, and with your seat belt fastened to avoid interference from the seat belt reminder chime.
Put the key in the ignition, and turn it from position one ("Off") to position three ("On") rapidly eight times within 10 seconds, ending in position three.
The Ford Focus doors will lock and unlock automatically, signaling that the car is in remote keyless entry programming mode.
Within 20 seconds, press any button on each keyless remote. After each remote is programmed, the car doors will automatically lock and unlock to confirm successful programming. When all remotes have been programmed, turn the ignition to position one. The doors will automatically lock and unlock, confirming that remote keyless entry programming is complete.
You can't. Take it to Precision Tune or the Ford Dealer to get it done. They have codes you cannot know. Who wants car thieves running around with programming codes??!!
THE TRUNK RELEASE BUTTON IS ON THE REMOTE IF YOU HAVE POWER LOCK AND KEYLESS ENTRY. THERE IS NO TRUNK RELEASE INSIDE OF THE FOCUS
Turn ignition switch from OFF to ON 4times within 6seconds,leave ignition switch in the ON postion,Chime should sound to indicate that its in the learning mode,Within 10 seconds press any button on the remote transmitters,Do all other transmitters at the same time.
Program a new key and ignition to a 2000 ford focus
It's a touchy and intricate process. Look in your owner's manual.
From your description I'm not exactly sure what you mean. . . however. . . I'd suspect either a dead battery in the keyless remote -OR- the fuse that controls that circuit is blown. Consult your owners manual for which one it is and have a look.
ignition switch
There are many cars with keyless entry, mine is included (a 2002 ford focus). Keyless entry has been used since around the 90s and have been used ever since. There are still cars without keyless entry but they are all older models.
Science Focus Program was created in 1997.
You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.
It's on the passenger side.
learn how