Most often miss understood is programming. Programming the button REMOTE portion of the key is simple and referred to as matching. 1999.5 to 2006 with remote suffix with any of these letters, F, E, S, T, AM, DC
You do need 2 keys. You must be able to lock the drivers door and have the red led alarm light next to the lock button blink. If it does not blink, the alarm does not know the door is closed and will not go into matching mode.
Put one key in the ignition switch, turn on, do not start engine. Close the door, use 2nd key, turn door lock and hold in lock position for 10 seconds. Release key to neutral position.
Press a button on the remote, within 2 seconds press the same button again, the turn signal lights will flash, this indicates your remote matches the car system and is now recognized. Unlock door remove key from ignition. Remote should now work
2005 to 2007 Volkswagens using the H P or Q remote, same procedure, but only unlock door with key and don't hold it, then press button once
www.haakey.com
go to programyourremote.com and it will tell you how to do it for free.
How do you program a key fob to a 2003 Chevy Malibu
To program any kind of key fob you have to take it to a dealership.
How do I re program my key fob for renault laguna estate 1997?
change battery in a 2007 toyota avalion key fob
2006 jetta tdi both key remote not working
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
http://www.ehow.com/how_7456283_program-key-fob-harley-davidson.html
The key fob programing requires the dealer's scan tool.
just pull the key apart it takes a lot to pull apart
With a key or a Key Fob.
It is possible to program one key fob to use on two different cars. If the key fob uses a primitive fixed code system, programming two cars will not work.