Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.
Tips:
• A maximum of eight keys can be coded to your vehicle.
• Only use Securilock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle's engine) and the new unprogrammed
key(s) readily accessible.
• If no previously programmed coded keys are available, you must take
your vehicle to your dealer to have the spare key(s) programmed.
1. Insert a previously programmed
coded key into the ignition.
2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
3. Turn the ignition to the 1 (LOCK) position and remove the coded key
from the ignition.
4. Within ten seconds, insert the second previously coded key into the
ignition.
5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
6. Turn the ignition to the 1 (LOCK) position and remove the second
previously programmed coded key from the ignition.
7. Within twenty seconds of removing the previously programmed coded
key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second but not
more than 10 seconds.
Ebay sales them but then after you get the replacement you may have to have a Ford dealer program it to work with the ignition switch.
One way to unlock a Ford Escape without a key is with the car remote. Another way to unlock a Ford Escape without a key is by using a coat hanger. You may have to call a locksmith to open your car door for you.
Take the key to a ford dealership
program new keyswitch for 2003 odyssey
It is done by turning on and off the key a certain number of times and then pressing a button on the remote. Your owner's manual should have the exact instuctions.
At idle should be 13-20 psi With key on engine off should be 23-31 psi
Normally you don't touch the gas pedal , just turn your ignition key
How do you program a key fob to a 2003 Chevy Malibu
Cycle the key on/off 8 times and the door locks will lock and then unlock. Press the lock button on your key fob to program it
The key sensing wire in a 2004 Ford Escape is black and pink. It is always a good idea to verify the color of the wire before doing any work.
If you have a owner's manual the directions might be in there. For my 2001 Escape that's where I found the answer
how do i program a new central locking remote for an AU2 Ford Falcon